Equipment Wanted ([split] Sulzer Metco Equipment for Sale)
07-06-2008, 11:46 PM, (This post was last modified: 07-07-2008, 01:51 PM by Gordon.)
#1
Equipment Wanted ([split] Sulzer Metco Equipment for Sale)
Hello Mr.Gordon,

I have joined your forum recently in may'08. I have a twin wire arc spray and HVOF HIPOJET2100 and a 6axis Kuka Robot alongwith the necessary paraphernelia. My project keyman who conceived and procured this equipment left me abruptly, before takeoff. Since then
I had started learning about this thermal spray by reading books and the internet, I registered myself in your SEForum the moment I heard
of it and I,m reading most of your old postings.Now I began understanding this subject and also I have a customer offering me a
few TBC jobs.Now my doubt is can my HIPOJET 2100 handle Yitria stabilised Zirconium oxide. Could you kindly clear my doubt.If your answer is yes, then fine I can go ahead, if not what must I do? I must inevitably go for an APS system. At this juncture I cannot afford a brand new Plasma system, so I,m on the lookout for a used
equipment and in my search I landed in your forum.Your posting on 03-19-2007 reads about a 10 year old system in poland. I would like to know if this equipment is still available, if so can you help me in making contact with the seller.
If not can anybody in the forum lead me to a second hand Atmospheric Plasma Spray equipment.If things workout maybe I can
express my gratitude monetarily also.
As a last alternative if you could help me with the design,
I can dare to make my own.

Thank you
Regards
Sharvan


Gordon Wrote:For sale:

Sulzer Metco special purpose semi-automatic thermal spray system. Was used to molybdenum coat synchromesh rings for gear boxes. This equipment is about 10 years old and said to be in good condition and little used.

The system comprises of 2 type 5K guns with type 6CE control units, booths, automatic handling and grit blasting equipment, complete except for extraction/filtration equipment.

The seller is based in Poland. Please see links to some photographs below. For more information please email.

Photo1
Photo2
Photo3
Photo4
Photo5
Photo6
Photo7
Photo8
Photo9
Photo10
Photo11
Reply
07-07-2008, 11:20 AM,
#2
RE: Sulzer Metco Equipment for Sale
Hi Sharvan,

The Metco 5K guns are wire flamespray guns and will not spray zirconia nor will, to my knowledge the Hipojet 2100. For a cheaper option you could look at Rokide spraying. Either MEC, Mogul or Norton should be able to help you. I am not sure of the differences in quality between Rokide Zirconium and Plasma sprayed Zirconium though. The results are debatable between the two diiferent equipment manufacturers.
Reply
07-07-2008, 02:08 PM,
#3
RE: Equipment Wanted ([split] Sulzer Metco Equipment for Sale)
Hi Sharvan,

Sign0016 to the Surface Engineering Forum.

I have moved your post and replies here to form a new thread from http://www.gordonengland.co.uk/sef/sulze...ml#pid2135

I will echo Adam Wintle very helpful advice Big Grin

Quote:adam wintle Wrote:
Hi Sharvan,

The Metco 5K guns are wire flamespray guns and will not spray zirconia nor will, to my knowledge the Hipojet 2100. For a cheaper option you could look at Rokide spraying. Either MEC, Mogul or Norton should be able to help you. I am not sure of the differences in quality between Rokide Zirconium and Plasma sprayed Zirconium though. The results are debatable between the two diiferent equipment manufacturers.
Reply
08-06-2008, 10:45 PM,
#4
RE: Equipment Wanted ([split] Sulzer Metco Equipment for Sale)
sharvan Wrote:Hello Mr.Gordon,

I have joined your forum recently in may'08. I have a twin wire arc spray and HVOF HIPOJET2100 and a 6axis Kuka Robot alongwith the necessary paraphernelia. My project keyman who conceived and procured this equipment left me abruptly, before takeoff. Since then
I had started learning about this thermal spray by reading books and the internet, I registered myself in your SEForum the moment I heard
of it and I,m reading most of your old postings.Now I began understanding this subject and also I have a customer offering me a
few TBC jobs.Now my doubt is can my HIPOJET 2100 handle Yitria stabilised Zirconium oxide. Could you kindly clear my doubt.If your answer is yes, then fine I can go ahead, if not what must I do? I must inevitably go for an APS system. At this juncture I cannot afford a brand new Plasma system, so I,m on the lookout for a used
equipment and in my search I landed in your forum.Your posting on 03-19-2007 reads about a 10 year old system in poland. I would like to know if this equipment is still available, if so can you help me in making contact with the seller.
If not can anybody in the forum lead me to a second hand Atmospheric Plasma Spray equipment.If things workout maybe I can
express my gratitude monetarily also.
As a last alternative if you could help me with the design,
I can dare to make my own.

Thank you
Regards
Sharvan


Gordon Wrote:For sale:

Sulzer Metco special purpose semi-automatic thermal spray system. Was used to molybdenum coat synchromesh rings for gear boxes. This equipment is about 10 years old and said to be in good condition and little used.

The system comprises of 2 type 5K guns with type 6CE control units, booths, automatic handling and grit blasting equipment, complete except for extraction/filtration equipment.

The seller is based in Poland. Please see links to some photographs below. For more information please email.

Photo1
Photo2
Photo3
Photo4
Photo5
Photo6
Photo7
Photo8
Photo9
Photo10
Photo11

Hello,

You will find here very good equipment Metco 7M : https://www.plasmajet.ro

Exnner
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Is for sale used Termika-3 Mobile HVOF equipment Yod 9 7,777 06-04-2023, 05:01 PM
Last Post: Nikola
  Sulzer Metco F4 gun plasmajet1990 2 3,515 04-07-2022, 03:10 PM
Last Post: plasmajet1990
  Flame spray equipment for sale mgbaca1a 4 4,442 04-03-2022, 12:34 PM
Last Post: sprayjet
  Mobile HVOF equipment Nesher 12 9,591 02-25-2022, 12:38 AM
Last Post: romires777
  Looking for a used arc spray equipment MVagusta 7 6,864 07-26-2021, 01:07 PM
Last Post: Leeboy007
  wanted - arc spray equipment playdirt 1 4,625 06-18-2021, 10:50 AM
Last Post: balaji udyog (MSE)
  Arc spray wanted Alinomie 1 2,178 06-18-2021, 10:48 AM
Last Post: balaji udyog (MSE)
  7MC gas module wanted J!m 5 4,256 06-03-2021, 05:17 PM
Last Post: cincykids
  Metco Type 5P ThermoSpray Gun For Sale Mgregory87 0 1,915 02-09-2021, 11:05 PM
Last Post: Mgregory87
  Used equipment for sale Plasmajet 5 5,203 02-02-2021, 02:57 PM
Last Post: tobjung
  Metco 16E 14E for sale plasmajet1990 0 2,152 01-29-2021, 01:58 PM
Last Post: plasmajet1990
  HVOF equipment Jaydev 3 7,010 12-23-2020, 02:19 AM
Last Post: Alcides Eric Santi
Bell Metco 7MC console with power source for sale mgbaca 3 5,656 08-12-2020, 06:14 PM
Last Post: J!m
Bell USED SULZER METCO 9MB PLASMA GUN FOR SALE - PICTURES BELOW BigCJL 0 3,120 07-08-2020, 08:08 AM
Last Post: BigCJL
  Metco Flame Spray Equipment For Sale dcparise 0 2,771 05-24-2020, 01:40 AM
Last Post: dcparise



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd