7MC gas module wanted
02-03-2017, 05:11 PM,
#1
7MC gas module wanted
Hi guys.

I'm looking into a 7MC upgrade for my current employer and in order to limit downtime, I'd like a "loose" gas control module (top section) from either a 7MC or a 7MC-II console.

ANY CONDITION- it can be completely stripped of flowmeters, gauges, piping and solenoids etc. as long as the manifold rail and Amphenol are there. (and the Amphenol isn't a deal breaker).

This way, I can do my work off-line and swap in a module for testing without pulling a production console off line for weeks.

See what's collecting dust out in the barn and let me know please!

Thanks!

PS I will also consider a complete (or somewhat complete) console as well.
Spraying since '87. University of Metco alum (99-16)

Available for consultation services- please send a PM
Reply
02-04-2017, 09:38 PM, (This post was last modified: 02-04-2017, 09:39 PM by mgbaca1.)
#2
Exclamation  RE: 7MC gas module wanted
I Have complete 7MC console with gas module converted to scfm by Oerlikon Metco Calibrated in 2015/August
Price for full console: 2000 EUR plus transport, tax etc.
I have complete 7MR powder source as well
Price 2000 EUR
I have complete documentation for full plasma system as well
Reply
06-06-2017, 07:57 AM,
#3
RE: 7MC gas module wanted
I have still gas module from 7MC console for sell
Lower Price !!!!

Reply
04-14-2021, 07:07 PM,
#4
RE: 7MC gas module wanted
I recommend the Calorex Coxdpi 07 B Control Card Ignition Module, it has worked very well for me.
__________________________________________
We use it a lot in flat armored glass level 2 and I recommend it.
Reply
06-03-2021, 05:13 PM,
#5
RE: 7MC gas module wanted
(02-03-2017, 05:11 PM)J!m Wrote: Hi guys.

I'm looking into a 7MC upgrade for my current employer and in order to limit downtime, I'd like a "loose" gas control module (top section) from either a 7MC or a 7MC-II console.

ANY CONDITION- it can be completely stripped of flowmeters, gauges, piping and solenoids etc. as long as the manifold rail and Amphenol are there. (and the Amphenol isn't a deal breaker).

This way, I can do my work off-line and swap in a module for testing without pulling a production console off line for weeks.

See what's collecting dust out in the barn and let me know please!

Thanks!

PS I will also consider a complete (or somewhat complete) console as well.
Reply
06-03-2021, 05:17 PM,
#6
RE: 7MC gas module wanted
(02-03-2017, 05:11 PM)J!m Wrote: Hi guys.

I'm looking into a 7MC upgrade for my current employer and in order to limit downtime, I'd like a "loose" gas control module (top section) from either a 7MC or a 7MC-II console.

ANY CONDITION- it can be completely stripped of flowmeters, gauges, piping and solenoids etc. as long as the manifold rail and Amphenol are there. (and the Amphenol isn't a deal breaker).

This way, I can do my work off-line and swap in a module for testing without pulling a production console off line for weeks.

See what's collecting dust out in the barn and let me know please!

Thanks!

PS I will also consider a complete (or somewhat complete) console as well.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  wanted - arc spray equipment playdirt 1 4,626 06-18-2021, 10:50 AM
Last Post: balaji udyog (MSE)
  Arc spray wanted Alinomie 1 2,180 06-18-2021, 10:48 AM
Last Post: balaji udyog (MSE)
  Wanted: Gun for osu/metco/oerlikon/sulzer LD/U3 / OC1 Tistlo 1 2,221 03-24-2020, 08:12 PM
Last Post: Gabriel
Question Thermal Sprayer Wanted rrridley 5 11,159 06-26-2012, 06:16 AM
Last Post: norhdral
  10MB Plasma Gun wanted 2DOGSTAR2 0 3,716 06-22-2012, 11:24 AM
Last Post: 2DOGSTAR2
  Wanted - used Castolin CDS 8000 and Superjet Eutalloy Kit Vijay Deshpande 1 6,065 04-04-2012, 02:26 PM
Last Post: Gordon
  Wanted Sulzer Twin 10c powder feeder nickatbirmingham 2 8,986 04-26-2011, 10:41 AM
Last Post: 2DOGSTAR2
  55E or 55T- 18/5 Stainless Steel 1.6mm wire WANTED MET-ELITE 4 9,610 09-14-2009, 04:40 PM
Last Post: Gordon
  Wanted Sulzer Metco OSU TUBE-300 or CAP-300 or Value Pro Arc-200 accurate 2 7,668 06-06-2009, 02:46 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd