Gordon England Surface Engineering Forum



porosity of coatings

Posted by Alexei Goncharov (195.96.79.2) on 09:47:11 31/01/06

Dear Mr. Gordon,
In my last message 11.01.06 I touch on an question of adhesion of coatings (1). Now I present my point of view on porosity (2). I will be very grateful to everybody for any comments.
2. Succeeding your idea that the main factor of porosity of coatings is rapid solidification of melting material of particles I d like to propose tow more major ways of realization of that factor. In addition to mentioned in your review low impact energy and shadowing effects it has to be regarded: high concentration of spraying material (A) and wide range of size of the particles (B).
A. Clustering of the particles catches bubbles of environmental gas at the substrate and heats them during solidification. Formation of cavity or gas leakage through the coating just build up will be the result of heat exchange. The gas leakage leads to creation of open pores which will reproduce by the same manner crossing the thickness of the coating. Layering of coatings can be regarded as a consequence of open porosity if the substrate is sprayed by several passage of the torch (gun) along the component. The gas filled open pores acts in this case as air damper hindering to valuable contact of solidifying material and sprayed before. It worth to notice here that contamination of the surface plays the same role as a gas being in open pores. Layering will increase if the coating is significantly cooled during the period between tow passages. Obviously it happens because of the gas increase inside the coating. Some years ago I suggested the method of thickness growing (in the case, for instance, if thickness is not enough for grinding) which consists of three phases: cleaning, heating and additional spraying. The destination of each phase is clear keeping in mind said above.
B. During interaction of supersonic gas flow with the substrate its turnover from normal move to parallel to the surface is realized in shock wave standing near by. The vector of particles velocity changes from semi normal direction to that inclined to the substrate. The less is the size of particles, the more is an angular displacement. So, in polydispersal divergent flow the situation when the products of burning (or products of detonation) with small particles inside streamlines the surface with solidified massive particles is quite realistic. As a result of streamlining the growth of inhomoginities takes place. They achieve the height 0.1mm for alumina and 0.3mm for titania (0.5mm total thickness) detonation coatings on plane surface. Mentioned above shadowing effects will occurs on the inhomoginities giving arches, niches and terraces which can develop into pores in further spraying. Best regards,
Alexei Goncharov


Follow Ups:
Surface Engineering Forum

Surface Engineering Message Board Archive

Surface Engineering Message Board Archive Index

Search Message Boards Archives

www.gordonengland.co.uk





GoogleCustom Search

Post A Message!

Gordon England Surface Engineering ForumPlease go to the new Surface Engineering Forum as this old message board is a read only archive. Please copy and paste relevant information or link to the page if you wish to reactivate a thread on the new forum.







Gordon England Independent Thermal Spray Coating Consultant
Telephone: +44 (0)1252 405186

PLEASE CLICK HERE TO EMAIL

Site Links

Introducing

Nature of Thermal Spray Coatings

Surface Engineering in a Nutshell

Surface Engineering Forum

Thermal Spray Gun Repair Service

Plasma Consumable Parts

Thermal Spray Powder Supplies

Applications:

Thermal Spray Coatings on Carbon and Glass Fibre Reinforced Polymers

HVOF Coating of Paper Making Roll

Abradable Coatings

Photomicrographs

Thermal Spray Processes:

Combustion Wire Thermal Spray Process

Combustion Powder Thermal Spray Process

Arc Wire Thermal Spray Process

Plasma Thermal Spray Process

HVOF Thermal Spray Process

Detonation Thermal Spray Process

Plasma Flame Theory

Cold Spray Coating Process



Wear and Use of Thermal Spray Coatings

Corrosion and Use of Thermal Spray Coatings

Glossary of Thermal Spray and Surface Engineering Terms

Image Directory for Thermal Spray Coatings

Plasma Gas Flow Information

Plasma Gas Flow Correction Calculator

Contact Form

Links to other interesting sites related to thermal spray and surface engineering

Reciprocal Links

Periodic Table of the Elements

SI Units

Calculators for Conversion between Units of Measurement

Hardness Testing

Surface Engineering Message Board Archive

Surface Engineering Message Board Archive Index

Search This Site


Photography Gallery2

Photography Gallery3


© Copyright Gordon England