Posted by Gordon England on February 24, 2003 at 02:49:47:
In Reply to: Pump wetted parts erosion posted by Rick Mohr on February 21, 2003 at 18:35:47:
: When moving fluidized silicon oxide (DE) through pumps, I am interested in extending useful life of the wetted parts. One means is to select materials by use of hardness scales of the base metals. Economics of alloys leads me to consider coatings on wetted parts, such that I could use the softest, cheapest alloys such as ductile iron or cast iron. In the case of either ductile or cast iron, which type of coating and application method would be recommended and proven to yield longest service life?
Hi Rick
HVOF coatings of tungsten carbide/cobalt chromium (86WC-10Co-4Cr) or possibly plasma sprayed chromium oxide could be suitable candidates.
Regards Gordon
Follow Ups:
Please go to the new Surface Engineering Forum as this old message board is a read only archive. Please copy and paste relevant information or link to this page if you wish to reactivate this thread on the new forum.
