HA porous coating for medical application
01-01-2019, 04:52 AM,
#1
HA porous coating for medical application
hi guys....do anyone hv experience with HA porous coatings?
Reply
01-07-2019, 11:17 PM,
#2
RE: HA porous coating for medical application
Typically for some applications You need plasma spray process. The LPPS/VPS plasma spray process is the best for this purpose
Reply
01-08-2019, 02:51 AM,
#3
RE: HA porous coating for medical application
(01-07-2019, 11:17 PM)mgbaca1a Wrote: Typically for some applications You need plasma spray process. The LPPS/VPS plasma spray process is the best for this purpose

tq mgbaca1a for the reply...my prob is...what is the best parameter to use for the HA porous coating using plasma spray?tq
Reply
01-08-2019, 01:54 PM,
#4
RE: HA porous coating for medical application
That question is too broad in nature. We don't know your torch, powder feeder, control console.
Reply
01-11-2019, 01:58 PM,
#5
RE: HA porous coating for medical application
Also, we don't know your process. I have to admit that I assumed APS, but it could just as well be LPPS or VPS for all we know.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  F4 nozzles 6 mm and 8 mm. Application differences uncle_tyoma 1 962 10-16-2020, 03:57 PM
Last Post: Vadim Verlotski
  Sealer application on TSA Massey 8 14,658 10-10-2016, 09:25 AM
Last Post: LouisRichter
  Coating solution needed for slurry pump application Killswitch 11 9,290 02-19-2015, 02:57 AM
Last Post: Axis Machine
Question problem about powder paint application over Zn metalizing basakglkn 8 14,409 05-23-2012, 08:21 AM
Last Post: Jaydev
  Porous Machined Surface on Part Lower Inner Diameter on Inco 718 Coating Surface Alexangel1226 4 7,459 03-19-2008, 02:05 PM
Last Post: Gordon
  Causes to Porosity Defect on Porous TBC Coating Alexangel1226 7 13,429 02-25-2008, 01:59 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd