Problem solved Diamalloy 1010 with DJ2700 C3H6
09-21-2018, 05:31 AM,
#1
Diamalloy 1010 with DJ2700 C3H6
Dear Experts,

We met a quality problem(high and big porosity level) of Diamalloy 1010 powder spray with DJ 2700 Propylene fule gas, we think the spray parameters was wrong, anybody has experiences in spray parameters could share, thanks in advance!

B,R
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Diamalloy 2004 surface roughness problem Khairul Anwar 2 5,841 06-20-2023, 03:39 PM
Last Post: Lars.Patrick
  Reg:Diamalloy 1005 Parameters. Dileep 0 3,073 10-06-2015, 05:41 AM
Last Post: Dileep
  DIAMALLOY 4700- HVOF alvliew 0 3,839 11-05-2014, 06:04 AM
Last Post: alvliew
  Torch Mounted Air Cooling for DJ2700 and F4 Stephen Booth 0 3,434 04-01-2014, 05:55 AM
Last Post: Stephen Booth
  DJ2700 low fuel gas flow guang 1 4,172 12-23-2012, 04:30 PM
Last Post: Gordon
Shy flow rate conversion of propane in DJ2700 guang 1 4,934 12-16-2012, 11:52 PM
Last Post: KevGarty
  Low DE of DJ2700 jeffsays163 7 9,992 08-05-2008, 05:19 PM
Last Post: Gordon
  Diamalloy 1008 H.D. Crankshaft Repair HVoilF 4 11,850 04-12-2008, 11:08 AM
Last Post: hvofhamid
  DJ2700 & JKote Intel55 3 6,603 09-25-2007, 02:49 AM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd