Ceramics coating VS Stellite coating
01-15-2008, 06:09 AM,
#1
Rolleyes  Ceramics coating VS Stellite coating
This forum is wonderful. Such an informative place to learn about.

Any one can help?
I intend to apply cavitation/erosion resistant coatings in my pumps blade, casing, inlet and outlet of my pumps.

The fluids we dealing are from water, seawater, waste water and even hydrocarbon.

But here come the question,

In general, Ceramics coating is it better then Stellite coating? Or the other way round?

Is there any journal or links that could provide some comparative information?
Reply
01-15-2008, 08:04 PM,
#2
RE: Ceramics coating VS Stellite coating
Hi thelai2002

Sign0016 to the Surface Engineering Forum.
Quote:In general, Ceramics coating is it better then Stellite coating? Or the other way round?
By ceramics do you mean oxide ceramics like chromium oxide and alumina or are you including cermet coatings like WC/CoCr and the like? Are you refering to stellite generally as metallic coating or specifically to stellite 6? and whether it is a fused/welded type or thermal spray coating?

What ever the above, your question is going to be difficult to answer. Cavitation, erosion and corrosion are complex. The fluid that is being pumped will be a big factor, clean water may result in primarily a cavition problem, while waste water could be more corrosive and erosive. Impingment angle is another, tough more ductile coatings tend to be better for ~ 90 degree, while harder coatings are best for less than 45 degree.

Popular cavitation/erosion coating are HVOF/HVAF WC/CoCr and stellite 6. Not seen any decent comparative studies between these two coating types Sad

This recent thread and links may be worth looking at:

coating-for-caviation-t-273.html

A few more links:
(links now dead)
Reply
01-16-2008, 02:57 AM,
#3
RE: Ceramics coating VS Stellite coating
Yes, i nod that the comparision would be difficult. Anywhere, I have learn alot from the links. Thks lots
Reply
01-16-2008, 11:44 PM, (This post was last modified: 01-19-2008, 08:37 PM by plasmajet1990.)
#4
RE: Ceramics coating VS Stellite coating
Tray ESD (Electro-Spark Deposition) with WC electrode .
(link dead)



thelai2002 Wrote:This forum is wonderful. Such an informative place to learn about.

Any one can help?
I intend to apply cavitation/erosion resistant coatings in my pumps blade, casing, inlet and outlet of my pumps.

The fluids we dealing are from water, seawater, waste water and even hydrocarbon.

But here come the question,

In general, Ceramics coating is it better then Stellite coating? Or the other way round?

Is there any journal or links that could provide some comparative information?
Reply
01-17-2008, 04:46 AM,
#5
RE: Ceramics coating VS Stellite coating
You can also think about applying Glass Flake coatings on pumps
Vijay Deshpande
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Looking suggestion for S2B "Z" notch coating & dove tail ARC spray aluminium coating demionkrishan 1 1,494 02-22-2022, 12:12 PM
Last Post: Artyom
  Stellite 31 Daneizer 0 1,598 02-05-2021, 04:15 PM
Last Post: Daneizer
  grinding wheel for stellite 6 hvof coating raviswanadha 8 17,993 12-07-2018, 01:15 AM
Last Post: achmadarifudinh
  Stellite 6 welding rods Desmond 7 16,996 04-18-2016, 07:31 AM
Last Post: sreenuvundela
  Can stellite 6 fuse ??? Met.Eng. 1 5,244 03-12-2014, 06:19 AM
Last Post: sreenuvundela
  Ceramics KevGarty 1 3,304 09-09-2013, 05:30 PM
Last Post: Gordon
  Calorized and Ceramics Coating Oxygen Lance Pipe iwan-sedaryawan 0 4,483 03-04-2013, 03:42 PM
Last Post: iwan-sedaryawan
  Stellite Powder test guru2707 1 7,901 02-27-2013, 08:05 AM
Last Post: novakmichal86
  Stellite Hardfacing test guru2707 4 14,114 06-04-2012, 01:03 PM
Last Post: Aseem
  HELP TO DEPOSIT SPRAY & FUSE COATING OF STELLITE POWDER --- REG sreenuvundela 10 13,562 03-14-2012, 11:46 AM
Last Post: Vijay Deshpande
  Powder Flame Spray for Ceramics Met.Eng. 9 11,033 09-19-2011, 04:46 PM
Last Post: Gordon
  Laser Cladding Stellite#6 Kedarnath 6 19,632 02-04-2011, 01:51 PM
Last Post: Nick4u1
  stellite coating samsarani 1 11,263 07-29-2010, 09:19 PM
Last Post: djewell



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd