Cold rolling
02-22-2017, 01:19 PM,
#1
Cold rolling
Hello to all,

I need an opinion about HVOF or HVAF used for replacing of the hardened chrome layer on a cylinder used for cold rolling. Cylinder size: 600mm diameter and 3300mm long, weight 5.5 tons.

I will be grateful if someone that has made this coating with HVOF or HVAF on that kind of cylinder will share the experience.
It is suitable the coating with HVOF or HVAF given the high mechanical pressure and effort involved in cold rolling process?

Thanks in advance!

Ion
Reply
02-22-2017, 03:16 PM, (This post was last modified: 02-22-2017, 03:16 PM by djewell.)
#2
RE: Cold rolling
WC-12Co coatings applied by the M3 gun from UniqueCoat Technologies were tested in the development of the CVT used in the Nissan Rogue. They were found to be able to withstand contact pressure of 3.5 GPa, which is 75% more than what was previously measured with HVOF coatings. If you know the contact pressure in your cold rolling application, you can compare it 3.5 GPa and see if it is suitable.
Reply
02-24-2017, 09:23 AM,
#3
RE: Cold rolling
(02-22-2017, 03:16 PM)djewell Wrote: WC-12Co coatings applied by the M3 gun from UniqueCoat Technologies were tested in the development of the CVT used in the Nissan Rogue. They were found to be able to withstand contact pressure of 3.5 GPa, which is 75% more than what was previously measured with HVOF coatings. If you know the contact pressure in your cold rolling application, you can compare it 3.5 GPa and see if it is suitable.

Thank you! I will try find this value
Ion
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Lightbulb Plate Rolling / Roll bending Roller worn gerdogan 1 649 12-02-2022, 07:53 PM
Last Post: Vadim Verlotski
  Cold Spray with Tungsten Carbide LLBHW 3 12,683 04-24-2015, 01:06 AM
Last Post: Fermit
  Cold Spray Coatings on Titanium balance 4 8,695 04-24-2015, 12:59 AM
Last Post: Fermit
  YSZ deposited by Cold Spraying? Nadiir 4 5,427 03-22-2014, 11:26 AM
Last Post: Nadiir
  Cold Spraying & Cold spray combustion PPSABoyce 2 5,214 03-12-2012, 02:17 PM
Last Post: loriolo
  Cold Spraying porosity attin 4 7,095 03-09-2010, 04:30 PM
Last Post: drramc
  Cold spray Florin 3 5,827 02-22-2010, 12:39 AM
Last Post: cmkay@asbindustries.com
  Cold spraying titanium nitride AnthonyE 4 7,694 11-13-2009, 11:26 AM
Last Post: SimonH
Question Hot or cold process? Gordon 3 6,603 06-23-2008, 05:08 PM
Last Post: Gordon
  Hot Rolling Mill Rolls Vijay Deshpande 3 8,269 02-20-2007, 09:33 PM
Last Post: bhellman



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd