Coating on Boiler tube in Coal Fired Power Plan by using Tafa wire 97MXC
04-12-2016, 04:04 AM,
#1
Coating on Boiler tube in Coal Fired Power Plan by using Tafa wire 97MXC
Dear all,
we need any references in application of Coating on Boiler tube in Coal Fired Power Plan by using Tafa wire 97MXC, especially for resistance against crack while the temperature from 1400 dec C down to room temperature, just for 500 micron of thickness , any experiences of this wires has been used in that condition without any cracks ?
Your any share information were much appreciated..
Thanks and regards,
Iwan Sedaryawan | Director Cipta Agung CV | HP : +62 (0) 818504137 - 81357725946-08117019540 - | PIN BB : 2AD850B7| Skype : iwan.sedaryawan |Email : sedaryawan@ciptaagung.com | sedaryawan@yahoo.com | sedaryawan@gmail.com | Web-site : https://www.ciptaagung.com
Reply
04-23-2016, 05:48 AM,
#2
RE: Coating on Boiler tube in Coal Fired Power Plan by using Tafa wire 97MXC
Hello All:

I would like to broaden the discussion to cover the selection of alloys and processes for the protection of coal fired boilers:

Since this has been done for many years in USA, Europe and China, it seems like this should not be Intellectual property, but rather open source information. Can any one openly provide information on the selection of coating material, process and technique for coal fired boilers.

I have seen the following offered:

Ceramic Compound
Self Fluxing Alloys
45CT
TAFA 95 MXC, Tafa 97 MXC and equivalents
CrC NiCr
WC
Ceramics

I understand HVOF, HVAF, Arc, Sprayfuse, Laser, GTAW are among the processes, as well as PTA, and GMAW

Also under considerati0on is the environmental aspects, economic aspects:

a) operating temperature, pressure
b) Boiler type, materials, country of origin, design, age
c) Coal Composition
d) Operating cycle

etc. Is there an open source of information on the path to solutions?

Of course after this incenderators, MFB .....




















Stephen James Booth
www.ipsteknokraft.com
www.teknokraft.com
Indonesia WhatsApp +6281905603262

Reply
03-22-2017, 09:56 AM, (This post was last modified: 04-17-2017, 03:25 PM by Stephen Booth.)
#3
RE: Coating on Boiler tube in Coal Fired Power Plan by using Tafa wire 97MXC
Hi Iwan
just following up on an old post about boiler tube coatings. ARe you still doing boiler coatings

Some great developments; The Hand-Held AK-HH Gun and Portable Thermal Spray System for Manual Deposition of Metal and Carbide Coatings: http://kermetico.com/ak/hand

and Spray on Ceramic Coatings from Fireside Coatings. https://www.firesidecoatings.com/

used in combination an applicator can get some great results.

Stephen James Booth
www.ipsteknokraft.com
www.teknokraft.com
Indonesia WhatsApp +6281905603262

Reply
04-17-2017, 01:24 PM,
#4
RE: Coating on Boiler tube in Coal Fired Power Plan by using Tafa wire 97MXC
Hi, Stephen,

looks like your link does not work



Regards,
Vig
Reply
04-21-2017, 03:17 PM,
#5
RE: Coating on Boiler tube in Coal Fired Power Plan by using Tafa wire 97MXC
Metco was supplying a 50-50 Ni-Cr wire for paper boilers and digesters that works well in that rather harsh environment.

I don't know how the crack resistance would be going from 1400 to 70- and regardless of what I might know, I think the time from max to min temp is a critical factor... If the temp crashes fast (i.e. cold water wash-down) there is not a whole lot of coatings that would not crack and /or spall. Molybdenum comes to mind (at least it would stay on) but I think even that would crack. Never mind the cost of enough wire to coat a boiler...
Spraying since '87. University of Metco alum (99-16)

Available for consultation services- please send a PM
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Spray & Fuse coating for Boiler tubes Jaydev 8 8,477 05-10-2020, 08:14 PM
Last Post: SENTESBIR-POWDERS
  Boiler tube failure Flo24 8 13,992 06-22-2019, 01:19 PM
Last Post: velocity
  BOILER TUBE COATING ehasan 4 15,610 11-14-2017, 03:24 AM
Last Post: Stephen Booth
  coating Fluidized Bed Combustion Boiler tubes iwan-sedaryawan 9 8,083 09-18-2017, 05:01 AM
Last Post: Stephen Booth
  Query - SS Wire coating RV_DMG 3 3,716 02-13-2015, 06:14 AM
Last Post: RV_DMG
  Stellite (Cobalt Based) that resist against Coal @ 1200deg C Iwan Sedaryawan CA 2 3,065 12-12-2014, 01:11 PM
Last Post: Iwan Sedaryawan CA
  JP5000 combustion tube KevGarty 5 5,166 11-01-2013, 09:19 PM
Last Post: kschewe
  TAFA 45 CT arc spray coating shantanu 1 4,654 08-13-2013, 12:36 PM
Last Post: Gordon
  HVOF: Gas fired system Vs liquid fired system shantanu 3 6,494 06-19-2012, 04:06 PM
Last Post: Pete_F
  Coating of coal Boiler tube wall iwan-sedaryawan 6 7,815 05-10-2011, 07:16 AM
Last Post: A.Termika Ltd
  Refuse Incineration (Waste to energy) Boiler Coatings MichiganMan 4 7,006 09-26-2010, 05:48 AM
Last Post: Stephen Booth
  Erosion-corrosion issues in boiler applications sivakumar 1 5,383 05-04-2010, 08:40 PM
Last Post: MichiganMan
  twin wire arc spraying equipment for stainless steel wire, monel wire, etc. technovel 6 10,956 08-01-2008, 11:59 AM
Last Post: adam wintle
Rolleyes Boiler Tube Puncture amitpagare 2 6,766 04-27-2008, 06:40 AM
Last Post: drramc
  BOILER TUBE COATINGS Vijay Deshpande 3 7,050 02-15-2008, 08:42 PM
Last Post: jeffsays163



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd