Repair of base material defect after HVOF Coating
04-07-2015, 02:42 AM,
#1
Video  Repair of base material defect after HVOF Coating
Hi everyone..

We do HVOF coating for Valve ball & seats. Recently, one we faced an issue of surface defect of base material. A pin hole was observed during grinding operation of ball, which we could not notice after blasting/during coating.

The blow hole is very near to sealing area & will affect the performance in terms of leakage, or may result in coating pill off during hydro testing & cycling of valve.

Is there any method to seal/ repair the porosity, without having to go for stripping?

Please guide.
Reply
06-20-2015, 06:45 PM,
#2
RE: Repair of base material defect after HVOF Coating
(04-07-2015, 02:42 AM)Pranab_hvof Wrote: Hi everyone..

We do HVOF coating for Valve ball & seats. Recently, one we faced an issue of surface defect of base material. A pin hole was observed during grinding operation of ball, which we could not notice after blasting/during coating.

The blow hole is very near to sealing area & will affect the performance in terms of leakage, or may result in coating pill off during hydro testing & cycling of valve.

Is there any method to seal/ repair the porosity, without having to go for stripping?

Please guide.


Hi Pranab,
Did you find an answer to this problem?

Regards,
John
Reply
06-27-2022, 12:20 PM,
#3
RE: Repair of base material defect after HVOF Coating
Hi Team,

I suggest to go for Conforma clad seat and valve ball.It will be metallurgical bond and can be machined also.
Please reach out to us.

Regards


Sushil Kumar
Business Development Manager-India
sushil.kumar@kennametal.com
T :+918022198226
M :+919780891405,
Kennametal India Limited, | CIN: L27109KA1964PLC001546
Kennametal India Limited, 8-9th Mile, Tumkur Road, Bangalore-560073 Karnataka-India www.kennametal.com
Kennametal® manufactures sophisticated alloys in the form of castings, powders, coatings, consumables, and machined parts that resist wear, corrosion, and abrasion
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Ceramic Coating on Aluminum Base metal demionkrishan 9 4,758 02-03-2020, 09:35 AM
Last Post: DMan
  WC-CO-CR hvof coating thickness measurement on Base SS 316L JRB VIRANI 3 3,110 06-20-2019, 09:16 AM
Last Post: loriolo
  Defect Missing Material and Coating Failure achmadarifudinh 2 3,421 02-12-2018, 05:47 AM
Last Post: achmadarifudinh
  Good preparation for cast iron base material plzc126330 3 4,167 11-24-2016, 01:17 AM
Last Post: plzc126330
  Need Help selecting Correct Coating Material gsfraser 6 5,245 10-10-2016, 08:40 PM
Last Post: MVagusta
  Coating material kim jong hun 4 5,054 06-28-2016, 01:32 AM
Last Post: kim jong hun
  Plunger Repair with WC coating sal 8 7,348 04-26-2016, 10:54 PM
Last Post: pakalano
  Spray and Fuse Co-base or Ni-base alloy on Inconel 718 Frank 1 4,236 09-23-2012, 01:12 PM
Last Post: Gordon
  HVOF WCCoCr Coating defect Patrick K 5 8,669 05-25-2012, 10:08 PM
Last Post: pakalano
  Need help to suggest coating material operator 5 6,691 12-28-2011, 09:53 AM
Last Post: Guna
  Which powder can be applied on base structure A351-CF8M minh_8888 4 7,261 01-19-2011, 05:23 PM
Last Post: Gordon
  Repair Pump Shaft on Base Material Nitronic50 Piyapong 1 4,793 03-03-2010, 05:53 PM
Last Post: djewell
  Repair Ni-Cr coating vevecaz 4 6,693 12-22-2009, 08:00 AM
Last Post: k09
  Causes to Porosity Defect on Porous TBC Coating Alexangel1226 7 15,564 02-25-2008, 01:59 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd