DJ 2700 System Water cooled
02-13-2015, 06:23 AM,
#1
DJ 2700 System Water cooled
Dear All,

I have procured a second hand DJ 2700 system with fuel configuaration of Propylene & air cooled. To get better characteristics I would like to convert it to water cooled system. Now I have 02 major queries: -

1. What are the chances of success of this upgradation?

2. I have been told by my local service provider here that I would need hybrid front head assembly for gun & water jam box & water chiller for this. I do not have any instruction manual for this system so do not know what capacity & specification of water chiller I would need for this? can you share instruction manual of this water chiller or spec sheet for better sourcing? I expect here on this forum I can get my all queries returned satisfactory replied by experts.

Thanks for everybody in advance.




Regards

RV
Reply
02-20-2015, 04:11 PM,
#2
RE: DJ 2700 System Water cooled
Dear All,

I am seeking for a genuine help atleast on this forum. This may not attract too many sellers but though I feel knowledge sharing is good & atleast it is expected here on forum like Gordon England.



Thanks





(02-13-2015, 06:23 AM)RV_DMG Wrote: Dear All,

I have procured a second hand DJ 2700 system with fuel configuaration of Propylene & air cooled. To get better characteristics I would like to convert it to water cooled system. Now I have 02 major queries: -

1. What are the chances of success of this upgradation?

2. I have been told by my local service provider here that I would need hybrid front head assembly for gun & water jam box & water chiller for this. I do not have any instruction manual for this system so do not know what capacity & specification of water chiller I would need for this? can you share instruction manual of this water chiller or spec sheet for better sourcing? I expect here on this forum I can get my all queries returned satisfactory replied by experts.

Thanks for everybody in advance.




Regards

RV

Reply
03-13-2015, 10:21 PM,
#3
RE: DJ 2700 System Water cooled
Hi RV
You are going to need to do the update as in the picture, doing this, you are going to have more productivity, and coatings will be no so stressed, because with the standard DJ you can have some coating cracks, the problem with this kind of system could be the powder feeder, that need to much maintenance, and it is very expensive to repair, nobody answer before, because SM, now OM, fired quite all good technicians, for OEM economic problems, for the spares, you can contact so many alternatives more economic and with highest quality.
Water Requirements:
Pressure (min.) 2.76 bar-40 psi
Flow (min.) 9.5 l/min. / 2.5 US gall./min
Inlet temperature (max.) 24 °C / 75°F
Quality! < 30μS potable (drinking water)
So you can use, comon water if you have enough fresh water sorce, and if you need some other advice, do not esitate to contact me.
Best regards
Luigi
Reply
03-14-2015, 05:05 AM,
#4
RE: DJ 2700 System Water cooled
Hi RV

Luigi's information is correct, that is the flow and water quality you need.

A few notes:

a) Depending on the ambient high temperature, the capacity should be in the range of 15-25Kw for the chiller
b) The components recommended by Metco seem to be correct, the water jam box is important, as it shuts down the gases, if there is no water pressure
c) Indeed the production increases with water cooling.






Stephen James Booth
www.ipsteknokraft.com
www.teknokraft.com
Indonesia WhatsApp +6281905603262

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  coating hardness using Hipojet 2700M air cooled JRB VIRANI 10 2,903 03-08-2020, 06:41 AM
Last Post: Stephen Booth
  parameter DJ GUN 2700 gito 0 961 03-26-2019, 03:28 AM
Last Post: gito
  Water cooled vs air cooled Met.Eng. 5 1,761 12-08-2018, 04:01 PM
Last Post: vcduramais
  HIPOJET 2700 PARAMETERS Danmarco 1 1,524 09-17-2018, 07:57 PM
Last Post: Met.Eng.
  SG-100 + ext. 2700 - spraying parameters Jaryn 1 2,023 11-27-2017, 02:21 PM
Last Post: Artyom
  Distilled vs Deionized water in gun cooling system Max K 3 4,017 07-27-2015, 11:21 AM
Last Post: adam wintle
  DJ 2700 nozzle for hydrogen RV_DMG 1 2,565 10-27-2014, 12:33 AM
Last Post: KevGarty
  Water Plasma Spray System sreenuvundela 0 2,349 03-12-2014, 06:26 AM
Last Post: sreenuvundela
  Spray Table for Air Cooled SM HVOF gun Guna 4 3,970 04-09-2013, 05:28 AM
Last Post: Guna
  DJ 2700 is oxygen temperature important? Thomas 3 4,159 11-01-2012, 10:16 AM
Last Post: davclark
  Powder fluidity and injector clogging (DJ 2700 HVOF gun). pulaunias 7 10,192 04-19-2010, 03:16 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd