Valve seat coating
08-12-2014, 07:11 PM,
#1
Valve seat coating
Hi All,

A customer - a power plant wants to protect its valve seat from erosion caused due to high pressure water ( no corrosion as de mineralized water) ; pressure upto 150 kg/cm2. Customer tried stellite 6 welding and failed; my best guess was due to a high HAZ during welding of the small part ;

Suggestion on what coating an work? And would any sealer stay at the said pressure?

Regards

Shantanu
Reply
08-13-2014, 06:45 PM,
#2
RE: Valve seat coating
WC-Co-Cr has been used successfully in this application.
Reply
02-19-2015, 03:23 AM,
#3
RE: Valve seat coating
What is the base material?
Is it valve trim from a Fisher body valve, stem, etc.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  sealing gate valve WC coated problem ehsan 16 17,453 06-27-2022, 12:27 PM
Last Post: sushil1405
  Hard coating on valve Edson 3 5,065 02-19-2015, 03:18 AM
Last Post: Axis Machine
  ball valve and gate valve coating Jaydev 2 5,709 01-29-2015, 05:06 PM
Last Post: IgorGarcia
  ARC Spray for Bearing seat rebuilding shantanu 3 6,250 05-15-2013, 06:51 PM
Last Post: shantanu
  WC-Co by HVOF on Monel Ball valve raviswanadha 4 6,325 10-15-2012, 12:03 PM
Last Post: raviswanadha
  substrate deformation of WC coating in gate valve ehsan 2 5,986 12-14-2010, 09:15 AM
Last Post: Asiaf
  valve opening procedure sutech 7 10,043 11-12-2008, 05:46 AM
Last Post: Intel55



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd