Electroplating Vs thermal spray coatings
04-05-2014, 01:20 PM,
#1
Electroplating Vs thermal spray coatings
Hi All,

A customer needs to replace some guide pads which is currently electroplated with brass with Metallizing as the electroplated surface wears off prematurely

I need to know if the typical wear rate of a metallized / thermal sprayed surface is lower than that of electroplating considering there is negligible impact load so that we may replace the brass electroplating with Brass spray

Regards

Shantanu
Reply
04-10-2014, 07:16 AM,
#2
RE: Electroplating Vs thermal spray coatings
Dear Shantanu,

You can replace the same with metallizing.

The coating characteristics are superior than platting but price is also 3 to 4 times higher and if thickness requirement is high (more than 0.3mm) then thermal spray will be good option.

The thermal spary process is green technology compare to platting.

The wear rate will be almost same with minor difference.


Regards,

SREENIVAS
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Machining of thermal sprayed coatings ServiceTech 4 9,560 08-14-2023, 09:00 PM
Last Post: J!m
  Thermal spray coatings over carbon fiber substrate Hector Monjardin 5 6,634 11-18-2015, 04:00 PM
Last Post: Hector Monjardin
  Cold Spray Coatings on Titanium balance 4 8,695 04-24-2015, 12:59 AM
Last Post: Fermit
  Thermal Spray Coatings Vijay Deshpande 2 5,364 03-25-2013, 12:29 PM
Last Post: Vijay Deshpande
Information Chrome oxide thermal sprayed coatings shelf life Leanne 1 4,404 02-14-2013, 02:18 PM
Last Post: Gordon
  Color Difference in Ceramic coatings of Plasma Spray sreenuvundela 2 5,982 01-01-2013, 08:30 PM
Last Post: loriolo
  electroplating Graphite nicamarvin 3 13,708 04-08-2012, 09:08 PM
Last Post: nicamarvin
  Air Bubble defects in 75Cr3C2 -25NiCr Coatings deposited by detonation Spray System - sreenuvundela 11 12,257 09-10-2011, 05:14 AM
Last Post: LEN WOOD
Cool Instrument to check coating thickness of Thermal Barrier Coatings odski0317 5 17,699 12-01-2010, 10:09 AM
Last Post: dienngothe
  Book - "Thermal spray coatings & technology" farzin_g1 1 5,918 01-05-2009, 11:06 AM
Last Post: Gordon
Sad different nozzles of a spray gun can be used for the same coatings? fhyuan 2 5,476 05-18-2008, 10:29 PM
Last Post: hvofhamid
  Thermal Spray Coatings onto CFRP Voivod 4 8,147 04-15-2008, 10:27 AM
Last Post: Gordon
  ULTRASONIC TESTING OF THERMAL SPRAYED COATINGS Vijay Deshpande 4 11,093 01-04-2007, 08:37 AM
Last Post: Alexangel1226



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd