"Flame Spray Handbook"
04-28-2013, 07:49 PM,
#1
"Flame Spray Handbook"
Hi
was wondering if anybody has a ebook or scanned copy of :
Metco flame spray handbook: (formerly Metallizing handbook), by H.S. Ingham and A.P. Shepard
to share.
Sal
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Propeller shaft repair by flame spray in the cones area Iwan Sedaryawan CA 1 1,944 12-09-2016, 04:56 AM
Last Post: Stephen Booth
  Flame spray guns 5P, 5PII, Type N Hector Monjardin 1 2,477 11-17-2016, 10:35 PM
Last Post: mgbaca
  Build up with Powder Flame Spray Met.Eng. 8 8,655 05-30-2016, 12:08 PM
Last Post: Gordon
  Wire Flame spray and Twin Arc spraying wtaz 1 3,007 03-30-2015, 09:41 PM
Last Post: loriolo
  Technology of Flame Spray -old and new Boris Eizner 0 2,317 01-29-2015, 10:04 AM
Last Post: Boris Eizner
  acetylene flow limits for flame spray metco 6c chromalloymachi112 1 3,024 12-04-2014, 12:18 AM
Last Post: Met.Eng.
  16 E flame spray sal 4 4,787 09-17-2012, 08:32 AM
Last Post: loriolo
  Powder Flame Spray for Ceramics Met.Eng. 9 9,024 09-19-2011, 04:46 PM
Last Post: Gordon
  Machining for Aluminum Bronze wire flame spray iwan-sedaryawan 3 6,476 01-12-2011, 11:47 AM
Last Post: iwan-sedaryawan
  Flame spray aluminuim WULF 4 4,672 02-06-2010, 10:02 AM
Last Post: WULF
  Which powder should I use with my combustion flame spray gun? jamaicanarchie 3 4,814 06-06-2009, 06:05 PM
Last Post: Gordon
  Flame Spray with Liquid Precursor aioa 4 5,817 03-27-2009, 08:46 PM
Last Post: Gordon
  Flame Spray Gun aioa 2 4,714 03-16-2009, 06:13 PM
Last Post: aioa
  Flame spray parameters TurbineRepair 11 17,981 11-18-2008, 03:01 AM
Last Post: kc77
  Copper based alloy as a bonding layer in Flame / arc spray. iwan-sedaryawan 5 8,653 08-27-2008, 03:59 AM
Last Post: iwan-sedaryawan



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd