flow rate conversion of propane in DJ2700
12-16-2012, 04:34 PM,
Shy  flow rate conversion of propane in DJ2700
Really a good website for learning thermal spraying. I encounted an problem about the real flow rate of propane, because in DJ2700 system, the flow rate is labelled as FMR. How can I make a direct conversion? Is there a formula? Thanks very much!
12-16-2012, 11:52 PM,
RE: flow rate conversion of propane in DJ2700
Hi guang,

The flow meter conversion in SCFH is listed in the Parameter sheets (Please see attached)

You'll just need to make sure you are checking the correct sheet as per your Gun set up and equivalent powder i.e Propane, Propylene etc

Happy Spraying Big Grin

Attached Files
.pdf   DJ Gun Parameters.pdf (Size: 74.98 KB / Downloads: 1,036)

Possibly Related Threads…
Thread Author Replies Views Last Post
  wear rate of D2 tool steel shantanu 3 4,320 07-13-2020, 06:13 PM
Last Post: astmsteel
  Coating hardness conversion bhellman 7 36,239 02-18-2020, 10:13 PM
Last Post: Neufeld
  depostion rate dercrease cheshires science engineer 2 1,064 02-02-2020, 12:01 PM
Last Post: DMan
  conversion from lpg/propane to hydrogen rmsengineering 0 1,039 12-15-2019, 02:46 PM
Last Post: rmsengineering
  Using propane as hvof gas. Intel55 7 7,425 11-12-2018, 11:28 AM
Last Post: Yod
  85% propane versus 95% propane in HVOF pulaunias 12 9,945 10-30-2018, 05:20 PM
Last Post: Yod
  Propane gas in HVOF liaemars 2 1,336 10-18-2018, 11:23 AM
Last Post: mgbaca1
  Problem solved Diamalloy 1010 with DJ2700 C3H6 plzc126330 0 978 09-21-2018, 05:31 AM
Last Post: plzc126330
  what is replacement of propane gas in HVOF mlavar 7 6,185 03-27-2016, 09:43 AM
Last Post: rmsengineering
  HVOF and propane sprayloud 5 4,414 03-27-2016, 09:40 AM
Last Post: rmsengineering
  Propane flashback arrestor Nixx 9 9,715 08-22-2014, 02:38 PM
Last Post: Nixx
  Torch Mounted Air Cooling for DJ2700 and F4 Stephen Booth 0 2,584 04-01-2014, 05:55 AM
Last Post: Stephen Booth
  Convert Diamond Jet from Propylene to Propane LEN WOOD 2 3,450 05-29-2013, 01:59 AM
Last Post: LEN WOOD
  DJ2700 low fuel gas flow guang 1 3,015 12-23-2012, 04:30 PM
Last Post: Gordon
  Methane or Propane guang 1 2,890 09-23-2012, 12:47 PM
Last Post: Gordon

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd