Coating to Stainless Steel mesh
01-05-2011, 02:11 PM,
#1
Coating to Stainless Steel mesh
Hello
I am working for a filtration company as a student from Loughborough university on a ongoing project into coatings to Woven wire mesh.

I am currently looking into coatings/surface finishes for woven wire mesh packing using in scrubbing towers.

The situation is this:
Customer uses mesh as a form of gas scrubbing unit, I am unsure exactly what gas we are talking about (I understand this is quite important to offer advice) I don't believe it is anything highly corrosive or that any extreme temperatures/pressures are involved.

The current mesh although offering a reasonable surface area the customer requires a greater area.

My question to you is can you recommend any surface finishes that will successfully increase the surface area for this applications.

Current ideas I have had include
Acid etching (HF)
Shot blasting

Would these two be suitable, is there anything else you can recommend
Thank you

Robert
Reply
01-05-2011, 05:20 PM,
#2
RE: Coating to Stainless Steel mesh
The two methods you indicated would slightly increase the surface area, but not much. With the limited information you gave, a rough arc spray coating would give you even more surface area. There could be some problems that are created with this approach, which you would have to investigate. This is just an idea for brainstorming.
Reply
01-14-2011, 04:44 AM,
#3
RE: Coating to Stainless Steel mesh
How does the customer know they need more surface area? What is that based on?

You make it sound like something about the mesh reacts with these gases, and that it's not just acting as a mechanical filter. So if that's the case, it seems like coating it with anything would reduce the surface area. Some sort of surface treatment might be an option, but why not just use finer wires?
Reply
01-14-2011, 09:03 PM,
#4
RE: Coating to Stainless Steel mesh
Hi Robert

Sign0016 to the Surface Engineering Forum.

Difficult to answer without much more information. The obvious one being the use of a finer mesh.
Reply
01-17-2011, 11:22 AM,
#5
RE: Coating to Stainless Steel mesh
Thank you all for your advice.
I am sorry I am unable to provide much information.
The finer mesh is an option but that will increase pressure drop.
I will endeavour to obtain more information and get back to you
Thank you again for your help

Robert
Reply
04-04-2011, 03:51 PM,
#6
RE: Coating to Stainless Steel mesh
(link dead)

I would ask them there. They seem to have a very knowledgable staff when it comes to coating and/or heat trearing stainless steel wire mesh. I recently had them heat treat some monel wire cloth for me and they did it quickly and effectively.
Reply
05-27-2014, 08:15 AM,
#7
RE: Coating to Stainless Steel mesh
usually the shakers are used to finishing area in wire meshes
(link dead)
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Combination of aluminum and stainless steel davehetfield 2 2,841 04-20-2021, 05:36 PM
Last Post: Vadim Verlotski
  Surface hardening [steel + steel alloys] haggis 1 3,681 07-09-2017, 12:42 PM
Last Post: plasmajet1990
  Bonding coating for Cast steel subsrate plzc126330 5 5,635 08-15-2016, 09:01 AM
Last Post: plzc126330
  WC/Co/Cr on Stainless steel 420 coating Arturas 2 4,366 06-01-2016, 03:53 PM
Last Post: shantanu
  Explain hardness of stainless steel to me? antknee 5 71,157 01-30-2014, 08:14 AM
Last Post: jigneshb17
  Stainless steel pipe coating larsen 1 6,146 09-07-2013, 01:23 PM
Last Post: Ryley5566
  Silicone based sealer for stainless steel arc spray pappabearlee 6 8,698 11-30-2012, 01:58 PM
Last Post: MichiganMan
  chrome oxide coating failure - 24" dia. steel roll rconnor 3 7,275 07-10-2012, 02:37 PM
Last Post: loriolo
  Stainless steel questions szzuk 2 5,210 09-19-2011, 09:29 PM
Last Post: szzuk
  Woven wire mesh protective coatings Robert Alford 5 8,883 04-04-2011, 03:48 PM
Last Post: joncro55
  Coating options for large carbon steel tank Jimmy D. 9 12,963 12-15-2010, 07:50 AM
Last Post: ives
  Corundum (Sapphire) coating on stainless steel Fadi 1 8,549 02-19-2010, 08:56 AM
Last Post: drramc
  Coating to prevent carbon and stainless steel to corrode togehter Grettir 4 7,917 12-17-2009, 10:55 PM
Last Post: djewell
  Coatings on stainless steel 304 mamatha_0823 5 15,989 07-25-2009, 11:02 AM
Last Post: karunanidhi
  Hardfacing nickel based powders to AISI 431 Stainless Steel attin 10 15,336 04-28-2009, 02:26 PM
Last Post: djewell



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd