Coating Thickness
11-26-2010, 10:37 PM,
#1
Coating Thickness
Hi Evryone,

Given the porosity and oxide content What is the most effective coating thickness for Oxideceramics and Carbides..?
Reply
11-29-2010, 04:39 PM,
#2
RE: Coating Thickness
Hi Metallurgy_eng

This will be very dependent on the specific coating system and its function.

Generically, minimum thickness will be the point where even coverage is obtained and maximum thickness below the point of coating thickness limitation.
Reply
12-01-2010, 04:17 AM,
#3
RE: Coating Thickness
Oxideceramics .015 perside
Carbides .005 to .007 perside

(11-26-2010, 10:37 PM)Metallurgy_eng Wrote: Hi Evryone,

Given the porosity and oxide content What is the most effective coating thickness for Oxideceramics and Carbides..?
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Amdry 9951. Anyone know the maximum coating thickness Antcarroll 2 646 01-29-2021, 08:17 AM
Last Post: loriolo
  WC-CO-CR hvof coating thickness measurement on Base SS 316L JRB VIRANI 3 1,539 06-20-2019, 09:16 AM
Last Post: loriolo
  Coating Thickness Measurement Equipment Taz 1 1,578 01-09-2019, 07:46 PM
Last Post: Lemster68
  Abradable Coating Thickness limitation wasif 1 2,926 07-28-2015, 10:57 PM
Last Post: Johnny_Blaze
  The thickness of coating minh_8888 5 5,358 03-25-2015, 10:31 AM
Last Post: Dr.Boris A.Eizner
  Drum Thickness Coating Requirement for SS316. samshah 0 2,088 11-13-2014, 04:56 PM
Last Post: samshah
  coating thickness Brent 7 6,122 03-09-2013, 11:56 AM
Last Post: sreenuvundela
  uneven Wc coating thickness Brent 5 5,405 01-20-2012, 04:13 AM
Last Post: KevGarty
  COATING THICKNESS GAUGE ehasan 3 4,906 01-14-2011, 08:07 PM
Last Post: Gordon
Cool Instrument to check coating thickness of Thermal Barrier Coatings odski0317 5 15,881 12-01-2010, 10:09 AM
Last Post: dienngothe
  ferrous coating thickness gauge ehsan 1 3,655 04-27-2009, 04:15 PM
Last Post: Gordon
Question SS 316L Coating thickness measurement sumant 4 12,117 07-20-2007, 04:42 PM
Last Post: bhellman
  Coating thickness Arturas 3 6,772 06-10-2007, 08:52 AM
Last Post: Gordon
  THICKNESS TESTING OF 316 L COATING Vijay Deshpande 1 6,844 02-02-2007, 04:14 PM
Last Post: Gordon
  portable coating thickness measurement Arturas 1 7,331 10-31-2006, 07:04 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd