Refuse Incineration (Waste to energy) Boiler Coatings
09-20-2010, 07:44 PM,
#1
Refuse Incineration (Waste to energy) Boiler Coatings
Just curious if anyone out there has had any experience on field applications in this area (Refuse Incineration Boilers). I haven't seen much in the way of formal papers published, and I'm wondering if anyone has the will/desire/interest to discuss here.
Reply
09-22-2010, 03:35 AM,
#2
RE: Refuse Incineration (Waste to energy) Boiler Coatings
(link dead)
Reply
09-24-2010, 03:19 PM,
#3
RE: Refuse Incineration (Waste to energy) Boiler Coatings
Outstanding summary of the corrosion modes encountered in the industry. The criticality of operating temperatures in these units is oft misunderstood and explained fairly well in not-too-technical terms.

Has anyone found a better mouse-trap for boilers operated at higher temps. The inconel 625 seems to work fairly well lower in the boiler, but in the superheats it just doesn't get it done. Has anyone tried something in the stellite family here? I'm wondering if a cobalt base material might mitigate the issues that the nickel base encounter at the higher temps.

I'm thinking that a field trial on a small area with an interested client might be a decent, economical way to look into it. Am I crazy and destined to fail the trial, or has someone gone there already and have feedback/advice to make it work?
Reply
09-25-2010, 07:57 PM,
#4
RE: Refuse Incineration (Waste to energy) Boiler Coatings
Hi Michigan Man
There are a lot of different applications on refuse inceneritors, with HVOF, Arc Spray and special welding equipment, and every one has his own products, i did the HVOF and Arc spray application, and both worked quite fine, I've got a lot of documents about this applications.

regards
Best regards
Luigi
Reply
09-26-2010, 05:48 AM, (This post was last modified: 11-18-2017, 04:10 AM by Stephen Booth.)
#5
RE: Refuse Incineration (Waste to energy) Boiler Coatings
Would be great if we could expand the discussion to include more types of boiler including waste.

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Spray & Fuse coating for Boiler tubes Jaydev 8 10,746 05-10-2020, 08:14 PM
Last Post: SENTESBIR-POWDERS
  Boiler tube failure Flo24 8 16,064 06-22-2019, 01:19 PM
Last Post: velocity
  BOILER TUBE COATING ehasan 4 17,243 11-14-2017, 03:24 AM
Last Post: Stephen Booth
  coating Fluidized Bed Combustion Boiler tubes iwan-sedaryawan 9 10,167 09-18-2017, 05:01 AM
Last Post: Stephen Booth
  what's the effect of the spray energy to the coating's hardness? Spark 3 5,819 07-10-2013, 05:55 PM
Last Post: loriolo
  Coating of coal Boiler tube wall iwan-sedaryawan 6 9,461 05-10-2011, 07:16 AM
Last Post: A.Termika Ltd
  Erosion-corrosion issues in boiler applications sivakumar 1 6,440 05-04-2010, 08:40 PM
Last Post: MichiganMan
  Surface energy of thermoplastics heman2727 1 6,983 03-10-2010, 06:41 PM
Last Post: Gordon
Rolleyes Boiler Tube Puncture amitpagare 2 7,902 04-27-2008, 06:40 AM
Last Post: drramc
  BOILER TUBE COATINGS Vijay Deshpande 3 8,126 02-15-2008, 08:42 PM
Last Post: jeffsays163
  Plasma energy control Intel55 1 6,084 10-18-2007, 10:23 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd