JP5000 combustion tube
10-31-2013, 07:39 AM,
#1
JP5000 combustion tube
Has anyone ever came across JP5000 combustion tubes continuously melting ?

The nylon tube on the pig tail attached to the Stabilizer

Any thoughts

Cheers

Kev
Reply
10-31-2013, 01:59 PM,
#2
RE: JP5000 combustion tube
(10-31-2013, 07:39 AM)KevGarty Wrote: Has anyone ever came across JP5000 combustion tubes continuously melting ?

The nylon tube on the pig tail attached to the Stabilizer

Any thoughts

Cheers

Kev

When your coaxial stabilizer starts to wears out you will get a back pressure that can brake the combustion pressure hose.a clog barrel also will increase the internal pressure leading to damage the powder hose too.
When reassembly try to fill the hose and pig tail with kerosene to avoid hot combustion gases get in to the plastic hose
Reply
11-01-2013, 01:42 AM,
#3
RE: JP5000 combustion tube
Thanks for the feedback,

He has tried a complete new gun on the system and still gets the same fault? I was thinking a pressure or flow issue that could effect the S/R causing a harsh start or aggressive combustion

Clutching at straws really !

Reply
11-01-2013, 02:48 AM,
#4
RE: JP5000 combustion tube
(11-01-2013, 01:42 AM)KevGarty Wrote: Thanks for the feedback,

He has tried a complete new gun on the system and still gets the same fault? I was thinking a pressure or flow issue that could effect the S/R causing a harsh start or aggressive combustion

Clutching at straws really !

Maybe a leakage in the hose , in the console side , will let the heated gases move into pig tail and hose. filling the hose with liquid, uncompressible, you will avoid this .
Reply
11-01-2013, 03:33 AM,
#5
RE: JP5000 combustion tube
Thanks Warx will pass it on

All the best
Reply
11-01-2013, 09:19 PM,
#6
RE: JP5000 combustion tube
I use the st model which is a bit smaller. The gun and system are balanced for pressure. I had a leak in the pressure sensor hose at the console a little while ago. It made the pieces on the back stabilizer melt in a few minutes of running.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Green flame in HVOF hydrogen - oxygen combustion JeroenB 3 2,164 05-07-2021, 01:24 PM
Last Post: JeroenB
  Boiler tube failure Flo24 8 16,065 06-22-2019, 01:19 PM
Last Post: velocity
  Want consumables for Metco 16E combustion wire system. Turbo Machinery 0 1,922 06-07-2019, 12:11 PM
Last Post: Turbo Machinery
  BOILER TUBE COATING ehasan 4 17,246 11-14-2017, 03:24 AM
Last Post: Stephen Booth
  coating Fluidized Bed Combustion Boiler tubes iwan-sedaryawan 9 10,168 09-18-2017, 05:01 AM
Last Post: Stephen Booth
  How to spray combustion chamber liner Michaellearnstocoat 5 6,203 09-06-2014, 09:24 AM
Last Post: Stephen Booth
  Parameters of Combustion wire gun Turbo Machinery 3 6,031 05-25-2014, 06:07 AM
Last Post: Stephen Booth
  Reduce unmelted particles in Combustion Wire Spray Alberto Villalobos 8 8,388 05-19-2014, 07:21 PM
Last Post: KevinS
  JP5000 Oxygen KevGarty 0 3,104 09-24-2012, 07:42 AM
Last Post: KevGarty
  Inconel 625 - JP5000 SDA 7 10,167 12-28-2011, 06:54 PM
Last Post: djewell
  Coating of coal Boiler tube wall iwan-sedaryawan 6 9,461 05-10-2011, 07:16 AM
Last Post: A.Termika Ltd
  JP5000 mehongbo 7 10,198 11-12-2010, 08:19 PM
Last Post: Kopi
  Which powder should I use with my combustion flame spray gun? jamaicanarchie 3 5,988 06-06-2009, 06:05 PM
Last Post: Gordon
  Bonding for Combustion/Flame Wire Spraying iwan-sedaryawan 3 7,453 02-10-2009, 04:59 PM
Last Post: iwan-sedaryawan
Rolleyes Boiler Tube Puncture amitpagare 2 7,902 04-27-2008, 06:40 AM
Last Post: drramc



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd