Metco CP/CPU for HVOF
12-03-2018, 04:18 AM,
#1
Metco CP/CPU for HVOF
Hello !
I have few questions about HVOF:
- can I use CP/CPU Metco console for using with small gas HVOF
- can I use 3MP powder feeder for small HVOF (max pressure 100 PSI /6.67 bar)
- which gun I can use with that consoles?
Reply
12-06-2018, 10:01 PM,
#2
RE: Metco CP/CPU for HVOF
(12-03-2018, 04:18 AM)lamxuyen Wrote: Hello !
I have few questions about HVOF:
- can I use CP/CPU Metco console for using with small gas HVOF
- can I use 3MP powder feeder for small HVOF (max pressure 100 PSI /6.67 bar)
- which gun I can use with that consoles?

That is a very, very old unit. The first of it's kind designed to be an automatic lighting console for use with 6P guns. The console is intended to be purged with compressed air for safety. It is not intended to be used as an HVOF processer and only should be used with the 6P gun. I was a service engineer with Metco from 1995 to 2011 and only have seen two or three in that entire span and one, unfortunately, I condemned for safety issues.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Pencil Metco CP/CPU for HVOF mgoral 0 2,414 04-24-2016, 01:55 PM
Last Post: mgoral



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd