[split] NiCrBSi - Abrbreviations
07-17-2007, 11:40 PM, (This post was last modified: 07-18-2007, 11:05 PM by Gordon.)
[split] NiCrBSi - Abrbreviations
Dear Colleauges
I would be very pleased with an international expression concerning analysis. Witch is the most common way to express various analysys;
NiCrBSi or Ni-Cr-B-Si, or
WC+Co-Cr or WC-CoCr
and so on.
Looking and reading almosta all net-info in this business, doesn't give any help to my question.
br bjarne
07-19-2007, 12:13 AM,
RE: [split] NiCrBSi - Abrbreviations
Hi Bjarne

Don't know if any international standards for abbreviations or shorthand notation of material description or analysis exist.

With all abbreviations or shorthand notation, it is important that your reader/audience understand. Its a bit like the term HVOF or PVD, which is fine for people that know what your talking about, but for those that don't, it should be expressed properly "High Velocity Oxygen Fuel" or "Physical Vapour Deposition".

With shorthand notation for material make-up, I think it is important to differentiate between alloy/compound and composite/blend. With a nickel chromium boron silicon alloy, I feel NiCrBSi is better than Ni-Cr-B-Si as the hyphens tend to indicate separation as in a blend or composite. Usually, expressing content in descending order (main constituent first) Composites expressed as WC/CoCr or WC-CoCr (tungsten carbide in a cobalt chromium alloy matrix) I think is OK, but WCCoCr would be quite different. If we need to be a little more precise with composition, it is usual to preceed the element or compound symbol with a number to represent % by weight (confusion could arise from %mol or %vol so these should be specified if different) like WC/10Cr4Cr or 86WC-10Co4Cr. Two powder types common in thermal spray contain nickel and ~5% aluminium. The alloy version I would express as NiAl or Ni5Al, the composite version as Ni/Al or Ni-Al or Ni/5Al or Ni-5Al.

It would be nice to have some form of internationally recognised standard (should they not already exist) like we have for element and compound symbols, but how long have SI units been about, and how many of us still use inch, foot, pounds, imperial gallon and us gallon? Happy0193 We all need to speak the same language but whose is best Happy0193

Possibly Related Threads…
Thread Author Replies Views Last Post
  WC-Co+NiCrBSi Applying on hydraulic piston rod Met.Eng. 4 3,663 05-09-2016, 05:45 PM
Last Post: Vadim Verlotski
  HVOF coatings on inside diameters down to 8 cm [split] SteelDryver 11 14,326 01-14-2015, 06:53 AM
Last Post: jack.son
  How to Fuse a NiCrbSi (16C) in a oven? Joris Kraak 4 5,092 04-01-2014, 05:47 AM
Last Post: Stephen Booth
  Proper mixing of NiCrBSi with WC/Co Arturas 1 2,752 01-02-2014, 06:40 AM
Last Post: sprayjet
  WC\Co + NiCrBSi Met.Eng. 2 4,625 05-05-2011, 02:33 PM
Last Post: A.Termika Ltd
Shy Repair to HD vertical pumps [split] HVoilF 1 4,844 05-13-2009, 03:25 AM
Last Post: Gordon
  wet cleaning procedure for Ti substrates [split] jdulgerska 5 6,416 02-26-2009, 02:15 AM
Last Post: Gordon
  [split] Can plasma coat graphite on copper? hanker886 1 5,794 10-10-2008, 06:43 PM
Last Post: Gordon
  BORON CLUSTERS [split] Boriding or boronizing ionsourcerer 2 7,849 01-06-2008, 05:39 PM
Last Post: Gordon
  Rockwell (macrohardness) topic [split] Alexangel1226 10 15,823 09-07-2007, 12:24 PM
Last Post: Gordon
  NiCrBSi lenicacraint 8 12,992 07-18-2007, 10:58 PM
Last Post: Gordon
  [split] Abradable coatings Madila Awalini 2 7,125 02-05-2007, 09:30 AM
Last Post: Madila Awalini

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd