setting metco type Y
02-11-2007, 11:40 AM,
setting metco type Y
hello everybody,
i have an old metco type Y , only for spraying alu and zn, but i don't know exact readings flowmeter, lichting pressure... if there is someone with a instruction manual or a copy? (not free) informations are welcome!
best regards
02-12-2007, 02:59 PM,
RE: setting metco type Y
Hi thierry

Metco type Y metallizing gun must be 50-60 years old, though probably still capable of doing an excellent job. Afraid I don't have access to the gun manual. Failing a response on this forum, I suggest you try your luck with the ASM thermal Spray Email Discussion List
as I know the ITSA have a Historical Collection that has a few Metco Y gun manuals and many of the ITSA members use this email discussion list.
02-12-2007, 03:33 PM,
RE: setting metco type Y
thanks gordon for informations, i 'll try to contact ASM.
03-23-2007, 06:36 PM, (This post was last modified: 03-23-2007, 06:37 PM by bhellman.)
RE: setting metco type Y
thierry Wrote:thanks gordon for informations, i 'll try to contact ASM.

Hi thierry, actually one doesn't need any flow meters to adjust a combustion spray equipment. The flow meters are later devices to the first beginning of TS, just to make the adjustments little easier.
The main parameter is the allowed acetylene pressure or flow velocity restriction by the nozzles.
Typical starting pressure values for any Metco combustion equipment are:
- acetylene 15 PSI
- oxygen 30 PSI
- compressed air 50 PSI
Proceed as follows:
Adjust these values by your regulators (forget the flow meters for a while).
- insert the wire in the gun
- light up and adjust wire feed so you can see the tip
- now play with the oxygen pressure to find out the shortest wire tip (this is the hottest flame)
- then readjust the wire feed to accurate level.
If one tries to maximize the output with higher pressures, the flame will blow out from the gas nozzle.
When a stable situation is reached, one can copy the flow meter readings for next time.
br bhe

Possibly Related Threads…
Thread Author Replies Views Last Post
  Metco Type 5P ThermoSpray Gun For Sale Mgregory87 0 1,079 02-09-2021, 11:05 PM
Last Post: Mgregory87
  For Sale Sulzer Metco Type 5P II Sulzerm 0 3,395 11-21-2016, 08:10 PM
Last Post: Sulzerm
  Type of this Metco APS system hamedfazelm 1 3,721 02-11-2013, 02:04 PM
Last Post: Gordon
  For Sale: Metco ThermoSpray Type 5P thespiderman 0 4,628 12-05-2011, 05:47 PM
Last Post: thespiderman
  METCO TYPE 4R arc spray system for sale oldvanman 3 8,572 05-08-2009, 03:13 PM
Last Post: accurate
  1966 Metco Spray gun Type 10E CoreyT 3 11,416 10-24-2008, 05:52 AM
Last Post: heidesign

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd