roughness of CRC TS Coating
08-26-2008, 02:42 PM, (This post was last modified: 08-26-2008, 02:57 PM by mehongbo.)
#1
roughness of CRC TS Coating
Hi,

Does anyone know the typical surface roughness of TS crc coating after grinding should be on combustion parts?

Thanks

H.B.
Reply
08-26-2008, 03:27 PM,
#2
RE: roughness of CRC TS Coating
Hi H.B.

Sign0016 to the Surface Engineering Forum.

First I assume "crc coating" is chromium carbide/nickel chromium coating.

I don't know what is typically required for combustion parts, but typical Ra roughness capabilities for these coatings lies somewhere between 0.1 - 0.6 micrometres for grinding with possibility of getting down to ~0.05 with lapping/super-finishing. Obviously, this is very dependent on process parameters, materials and grinding procedures.
Reply
08-26-2008, 07:42 PM,
#3
RE: roughness of CRC TS Coating
(08-26-2008, 03:27 PM)Gordon Wrote: Hi H.B.

Sign0016 to the Surface Engineering Forum.

First I assume "crc coating" is chromium carbide/nickel chromium coating.

I don't know what is typically required for combustion parts, but typical Ra roughness capabilities for these coatings lies somewhere between 0.1 - 0.6 micrometres for grinding with possibility of getting down to ~0.05 with lapping/super-finishing. Obviously, this is very dependent on process parameters, materials and grinding procedures.


Very good. I appreciate it Gordon

H.B.
Reply
10-14-2010, 09:56 AM,
#4
RE: roughness of CRC TS Coating
(08-26-2008, 03:27 PM)Gordon Wrote: Hi H.B.

Sign0016 to the Surface Engineering Forum.

First I assume "crc coating" is chromium carbide/nickel chromium coating.

I don't know what is typically required for combustion parts, but typical Ra roughness capabilities for these coatings lies somewhere between 0.1 - 0.6 micrometres for grinding with possibility of getting down to ~0.05 with lapping/super-finishing. Obviously, this is very dependent on process parameters, materials and grinding procedures.

Great answer! Normally we get Ra to .125~.25 on combustion parts.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  roller surface high roughness Tungsten carbide coating Ra 0.15-0.3mm zhuminkun 6 5,084 02-08-2019, 04:59 AM
Last Post: Taz
  Coating surface roughness William 9 26,632 12-26-2017, 10:40 AM
Last Post: Vadim Verlotski
Star Improving Surface Roughness of Polypropylene and Measuring Surface Roughness kat.rawlings 14 26,872 03-01-2011, 09:18 AM
Last Post: kat.rawlings



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd