metalllizing tugboat
09-23-2006, 07:42 PM,
#1
metalllizing tugboat
hello everybody

two questions
first . can you give me how many kilos of zn/al per square meter for a tickness of 250 ??
second. how many hours work a nozzle before to change (average)?
regards
thierry
Reply
09-24-2006, 12:36 AM,
#2
RE: metalllizing tugboat
Hi thierry

1.725 kg per square metre at 250 micrometres thick. Based on Metco technical bulletin for Metco Zinc-Al 85/15 alloy wire and 10E gun (wire req'd per unit of coating 0.0069 kg/cubic centimetre).

Sorry, I don't know answer to second question.
Reply
09-24-2006, 08:12 AM, (This post was last modified: 02-12-2007, 03:09 PM by Gordon.)
#3
RE: metalllizing tugboat
thanks for info,bye
thierry
Quote:Hi thierry

1.725 kg per square metre at 250 micrometres thick. Based on Metco technical bulletin for Metco Zinc-Al 85/15 alloy wire and 10E gun (wire req'd per unit of coating 0.0069 kg/cubic centimetre).

Sorry, I don't know answer to second question.
Reply
10-05-2007, 03:26 PM,
#4
RE: metalllizing tugboat
Hi Theirry,

Are you looking to purchase any zinc/aluminum for metallizing?

Thanks

Danns
Reply




Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd