least powder amount used in HVOF process
06-18-2010, 09:34 AM,
#1
least powder amount used in HVOF process
Minimum powder weight possible for HVOF process.

Hello,
Could somebody tell me the least mount (how many grams?) we can use in the HVOF spraying (e.g. JP5000)?
Because we have only a few powders to spray.

Thanks.
hustzc@gmail.com
Reply
06-23-2010, 12:35 PM,
#2
RE: the least mount used in HVOF process
Hi Hustzc

Not sure whether you mean minimum spray rate or minimum powder feeder hopper powder charge. Anyway, both will be dependent on the capabilities of your powder feeder.

If you are wanting to spray test small samples of powder (assuming your powder feeder performs ok at this level), then the minimum weight of powder charge would be enough to cover feed rate setting and powder feeder stabilisation + the amount required to deposit required coating.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  surface speed for HVOF coating process gito 8 5,579 05-03-2019, 01:08 PM
Last Post: Lemster68
  HVOF Powder HMB 2 4,811 04-19-2016, 04:35 AM
Last Post: HMB
  Is it possible to spray powder established for gas based HVOF in Fluid HVOF system?? sreenuvundela 0 3,479 04-18-2016, 07:52 AM
Last Post: sreenuvundela
  Poor flame with Ni-based metallic powder - HVOF process Roy 2 4,600 02-26-2016, 12:30 AM
Last Post: Roy
  Heat treatment after HVOF process to decrease porosity Giroud 3 6,239 07-13-2015, 05:51 AM
Last Post: aerotherm
  HVOF DJ2600 DJ8W powder feeder issue vetrinit 5 8,417 06-17-2015, 04:39 PM
Last Post: loriolo
  Copper powder spray by HVOF mlavar 5 6,750 05-16-2014, 03:46 PM
Last Post: djewell
  F4 Gun Process Parameters required for Metco 2043 Powder sreenuvundela 1 7,645 01-16-2014, 11:02 PM
Last Post: loriolo
  accumulation of powder in hvof nozzle mlavar 7 8,069 06-29-2013, 07:35 AM
Last Post: mlavar
  Hastelloy C275 HVOF powder Vijay Deshpande 1 4,862 04-08-2013, 12:03 PM
Last Post: loriolo
  Process Gasses Purity Impact towards Plasma Spray Process, equipment or outcome Alexangel1226 8 12,311 06-12-2012, 02:46 PM
Last Post: Eric Tolliver
  HVOF powder for Impeller minh_8888 5 7,192 07-23-2011, 12:23 AM
Last Post: minh_8888
  HVOF Powder for Block Engine and Cylinder Liner minh_8888 1 4,371 06-21-2011, 02:28 PM
Last Post: Met.Eng.
  Temperature HVOF Process ir_minja 2 7,509 10-04-2010, 08:23 AM
Last Post: Gordon
  ROLL CONDUCTOR (HVOF POWDER) ir_minja 1 4,855 10-04-2010, 07:27 AM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd