interpass temperature
08-11-2019, 02:26 AM,
#1
interpass temperature
when coating with HVOF how do people measure their interpass temperature and what temperature do people run?
i.e metros cut off temp for 7102 is 150c but is that measured where the coating is bieng applied or say six inches either side,

we shut down and do a cooling cycle when the surface area of the coating going on reaches 150C but is this correct as the workpiece is only say 130c
Reply
08-11-2019, 04:15 PM,
#2
RE: interpass temperature
We use infrared to check and keep around 90 to 120 C. For small and easy heating parts, we simultaneously use dry air for cooling.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Each pass thickness & interpass temp. confused velocity 42 20,144 02-05-2021, 09:29 AM
Last Post: DMan
  5220 Gun Temperature RV_DMG 6 6,405 11-17-2015, 12:45 PM
Last Post: Joris Kraak
  flame temperature nile 6 11,034 07-28-2007, 03:13 AM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd