how to reduce the contaminant when spray on Ti
01-06-2013, 04:53 AM,
#1
Sad  how to reduce the contaminant when spray on Ti
Hi ,everyone !
When I spray NiAl on T40,there are always some contaminant on the interface .I change the grit (80 mesh,white corundum ).Reduce the blasting pressure ,no Pre-heat ,but the result is still not good .
Please give me some suggestion,thanks !
Reply
01-07-2013, 02:25 PM,
#2
RE: how to reduce the contaminant when spray on Ti
Ti is very easy be oxidized, you need to spray the part immediately after blast the part.
Reply
01-07-2013, 07:40 PM,
#3
RE: how to reduce the contaminant when spray on Ti
What kind of contamination do you see? It is possible you are seeing embedded grit blasting media. You should thoroughly clean the grit from your part after blasting.
Reply
01-08-2013, 02:26 AM,
#4
RE: how to reduce the contaminant when spray on Ti
(01-07-2013, 07:40 PM)djewell Wrote: What kind of contamination do you see? It is possible you are seeing embedded grit blasting media. You should thoroughly clean the grit from your part after blasting.

thank you for advice ! I check the MET again and find that the contamination is grit scrap ,not oxidation,so I change my blasting parameter and clean carefully,the result is much better now!
Happy0193
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Request for solution to reduce porosity in HVOF Tungsten Carbide Coatings sreenuvundela 7 8,792 07-22-2020, 08:01 AM
Last Post: Simon Kim
  Arc Spray Reduce the pores Met.Eng. 6 4,519 09-29-2014, 07:41 PM
Last Post: loriol
  Reduce unmelted particles in Combustion Wire Spray Alberto Villalobos 8 5,841 05-19-2014, 07:21 PM
Last Post: KevinS
  How to reduce the intersplat boundaries in thermal spraying hustzc 3 4,389 05-16-2012, 01:30 AM
Last Post: Gordon
  Reduce Porosity in Ceramic Coatings rik 5 8,823 03-13-2012, 10:05 AM
Last Post: loriolo
Question How do reduce tensile strength of coating Metco 52C-NS? Christine 24 23,136 10-27-2011, 03:51 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd