grinding wheel for stellite 6 hvof coating
08-08-2011, 03:39 PM,
#1
grinding wheel for stellite 6 hvof coating
Hi,
we are doing stellite 6 HVOF coating on Valve Plug for plug valves.
we are planning to grind the coated surface on cylindrical grinding machine. Can any one suggest which is the best wheel to use for grinding stellite 6. We are looking at huge volume, grinding time is critical.
Looking forward for help .
Best Regards
Reply
08-09-2011, 09:36 PM,
#2
RE: grinding wheel for stellite 6 hvof coating
(08-08-2011, 03:39 PM)raviswanadha Wrote: Hi,
we are doing stellite 6 HVOF coating on Valve Plug for plug valves.
we are planning to grind the coated surface on cylindrical grinding machine. Can any one suggest which is the best wheel to use for grinding stellite 6. We are looking at huge volume, grinding time is critical.
Looking forward for help .
Best Regards



Hello there - We successfully use silicon carbide grinding wheels for this application. It would help you production if you are using a grinder with auto sizing and auto dress/compensation.

Good luck
Reply
08-10-2011, 04:38 AM,
#3
RE: grinding wheel for stellite 6 hvof coating
Thank you for your suggestion. could you further let me know what grit size of the wheel to use. 60-80 grit size would do ?
Reply
08-10-2011, 10:15 AM, (This post was last modified: 02-12-2019, 10:00 PM by Met.Eng..)
#4
RE: grinding wheel for stellite 6 hvof coating
In our company, We have made Stellite 6 coating on 316L steel. We use Silicon Carbide and also Diamond (100 C) wheels. The SiC can use a little bit slower cutting speed but You can choose to be less expensive.


Attached Files Thumbnail(s)
   
Reply
09-22-2011, 03:50 AM,
#5
RE: grinding wheel for stellite 6 hvof coating
The grit size is dependent on your finish requirement. If this is not a critical factor and you are using a rigid setup, I see no problems in using the 60 grit with a higher infeed.

Reply
09-25-2011, 07:00 AM,
#6
RE: grinding wheel for stellite 6 hvof coating
(08-08-2011, 03:39 PM)raviswanadha Wrote: Hi,
we are doing stellite 6 HVOF coating on Valve Plug for plug valves.
we are planning to grind the coated surface on cylindrical grinding machine. Can any one suggest which is the best wheel to use for grinding stellite 6. We are looking at huge volume, grinding time is critical.
Looking forward for help .
Best Regards



Hi Ravi,

Diamond wheels work very well for your application and please note that use of diamond wheels always depend on what surface finish you are expecting.

if you use D126 type grinding wheel, surface finish will be in the range 0.75 to 1 micorns Ra and you can use D30 grinding wheel to get better suface finish in the range of less than 0.1 microns Ra.

Regarding grinding time, you can reduce by using good grinding fixtures, good dressing set-up.


Regards,

SREENIVAS
Reply
07-31-2012, 10:53 PM,
#7
RE: grinding wheel for stellite 6 hvof coating

Hi

W are grinding stellite 6 with CBN it works very well,
Reply
08-03-2012, 06:50 AM,
#8
RE: grinding wheel for stellite 6 hvof coating
In lower volume production, and repair we often used AlOx Belts and got great speeds, and excellent finishes.
Stephen James Booth
www.ipsteknokraft.com
www.teknokraft.com
Indonesia WhatsApp +6281905603262

Reply
12-07-2018, 01:15 AM,
#9
RE: grinding wheel for stellite 6 hvof coating
(08-08-2011, 03:39 PM)raviswanadha Wrote: Hi,
we are doing stellite 6 HVOF coating on Valve Plug for plug valves.
we are planning to grind the coated surface on cylindrical grinding machine. Can any one suggest which is the best wheel to use for grinding stellite 6. We are looking at huge volume, grinding time is critical.
Looking forward for help .
Best Regards

Dear mr. raviswanadha

Could you share what the parameter stellite 6 apply with HVOF machine ??
I have project using stellite 6 apply with HVOF too.

Thanks,
Regards.

Achmad Arifudin H

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Stellite 31 Daneizer 0 213 02-05-2021, 04:15 PM
Last Post: Daneizer
Lightbulb Problem solved Grinding solution for Hastalloy HVOF coating plzc126330 3 2,591 05-28-2019, 01:08 PM
Last Post: velocity
  Grinding questions and my personal information Rage2371 12 3,317 05-25-2019, 10:47 AM
Last Post: velocity
  Crack indication Stellite 1 HVOF achmadarifudinh 4 1,621 02-20-2019, 03:13 AM
Last Post: Stephen Booth
  Parameter Stellite 6 HVOF DJ2600 achmadarifudinh 0 1,269 12-07-2018, 01:36 AM
Last Post: achmadarifudinh
  Dark surface after grinding of plasma tungsten carbide coating Lazha 1 2,280 05-31-2017, 12:07 PM
Last Post: loriolo
  Diamond Wheel Selection Met.Eng. 1 2,162 06-01-2016, 04:11 PM
Last Post: shantanu
  Can stellite 6 fuse ??? Met.Eng. 1 3,883 03-12-2014, 06:19 AM
Last Post: sreenuvundela
  Tungsten Carbide HVOF Coated Ball Valves grinding and Lapping constraints --- Reg sreenuvundela 4 9,421 07-29-2013, 09:04 AM
Last Post: Met.Eng.
  Grinding material novakmichal86 0 6,399 10-24-2012, 08:25 AM
Last Post: novakmichal86
  HELP TO DEPOSIT SPRAY & FUSE COATING OF STELLITE POWDER --- REG sreenuvundela 10 10,969 03-14-2012, 11:46 AM
Last Post: Vijay Deshpande
  Diamond grinding problem Met.Eng. 4 5,741 09-14-2011, 09:10 AM
Last Post: a.termika.ltd
  Diamond Grinding Met.Eng. 5 6,337 10-18-2010, 04:45 AM
Last Post: Stephen Booth
  stellite coating samsarani 1 9,701 07-29-2010, 09:19 PM
Last Post: djewell
  grinding gray alumina coating(101b-ns) erick212 2 4,339 09-26-2008, 01:36 PM
Last Post: erick212



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd