coating on zinc bath pot walls
05-28-2013, 12:08 PM,
#1
coating on zinc bath pot walls
Hi All,

Customer needs a suitable coating for protection of walls of zinc pot used in galvanizing. Basic purpose is protection against erosion as well as controlled reaction of the coating with the molten zinc
Material of construction of zinc pot is Low Carbon Low silicon
Since its a zinc pot, temperatures probably in the tune of 420- 460 deg C

Considering a WIRE ARC spray of Ni 20 Cr / Inconel 625 (considering ARC spray as pot is quite large, making HVOF coatings expensive and time consuming)

Suggestions and recommendations pls

Regards

Shantanu

Reply
05-28-2013, 08:00 PM, (This post was last modified: 05-28-2013, 08:01 PM by Arkzik.)
#2
RE: coating on zinc bath pot walls
Hello Shantanu!
What do you thing about hardfacing deposition? PTA or direct diod laser cladding? It can bin very efficient and provide high deposition rates.
As for erosion protection - can you provide more information: possible impact angles, impact velocity (low/high)?

Regards,
Arkadi
Reply
07-03-2013, 10:47 AM,
#3
RE: coating on zinc bath pot walls

Hi Shantany,

Ni20Cr and In625 coating is not the good choice due to Molten Zn high corrosion, you must select a special material to make coating!

Joe
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Hot Salt Bath Solution mmgerrie 10 2,731 07-29-2019, 06:11 PM
Last Post: Lemster68
  Zinc arc spray vs Zinc-rich silicate or epoxy paint KeDuan 1 2,235 04-23-2016, 06:05 AM
Last Post: Stephen Booth
  High Pressure Cylinder Compressor Walls Repair HVoilF 2 5,063 05-29-2012, 09:54 PM
Last Post: HVoilF
  brass coating over zinc part reg., prabu 2 3,484 11-08-2011, 09:40 AM
Last Post: xeviarjekel
  about corrosion against zinc molten denghans 3 4,263 05-31-2011, 12:30 PM
Last Post: denghans
  zinc Metco 10E sebastiangt 5 5,483 07-15-2010, 09:23 PM
Last Post: sebastiangt
  A Problem about Zinc Coating joylinkwu 3 6,149 05-30-2008, 04:05 PM
Last Post: ThermalMan



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd