coating of aluminum cylender
11-10-2011, 07:43 PM,
#1
coating of aluminum cylender
Hi
What is the best coating for inside of aluminum cylender for engine of small aircraft?
material of involved ring is Iron(42-45HRC).
I coated with Cr3C2-NiCr but afer 1-2 hrs test some scratchs seen on the coated surface.
what is your idea about NiCr(80/20) coating?
Regards.
Reply
11-12-2011, 08:29 PM,
#2
RE: coating of aluminum cylinder
Hi ehsan

Quote:I coated with Cr3C2-NiCr but afer 1-2 hrs test some scratchs seen on the coated surface.
what is your idea about NiCr(80/20) coating?

I doubt it would be any better, I think probably a lot worse.

Quote:What is the best coating for inside of aluminum cylender for engine of small aircraft?
material of involved ring is Iron(42-45HRC).

Difficult to answer (even knowing all the missing information that is really required), but I would probably put an iron/molybdenum coating on my list to try.
Reply
11-13-2011, 01:26 PM,
#3
RE: coating of aluminum cylinder
Dear Gordon
Let me know all of your info that you need.
Our process is HVOF,cylender is same as motorcycle cylenders,....
Regards.

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Ceramic Coating on Aluminum Base metal demionkrishan 9 4,742 02-03-2020, 09:35 AM
Last Post: DMan
Lightning Aluminum Foil wrapping as corrosion protection instead of coating LouisRichter 2 8,282 09-22-2017, 11:07 AM
Last Post: madan.pal
  Thermal Barrier Coating Aluminum Substrate for corrosion resistance alaskangrown 4 6,571 03-02-2015, 06:43 PM
Last Post: alaskangrown
  Black coated aluminum fin & Hydrophilic coated aluminum fin comparison Lumbantoruan 3 12,791 01-30-2009, 07:51 AM
Last Post: Lumbantoruan



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd