coating guns on inner wall of small parts
04-15-2011, 06:14 AM,
#1
coating guns on inner wall of small parts
Hello Everyone!
Herein I have one questions need your guys help.
Currently we're develop APS and HVOF on the inner wall of some cylindric or cone productions coating.
Because that the parts are too small to use the normal plasma spray and hvof spray gun,
(For Plasma spraying on inner wall,the ID is appr. 120mm)
(For HVOF coating on cone inner wall, the largest ID is appr. 90mm, Length=90mm appr.)
Does anyone know if there are smaller APS and HVOF guns(Better Sulzer Metco gun) which can suitable for the parts for robotic coating?
Or are there any other method to perform coating on those small parts?

Thanks.

Amanda
Reply
04-15-2011, 07:10 AM, (This post was last modified: 04-04-2017, 11:50 AM by Stephen Booth.)
#2
RE: coating guns on inner wall of small parts
for the HVOF you can try Kermetico

Kermetico HVAF and HVOF ID guns are reliable for ID 80 mm and larger

regards

Stephen




(04-15-2011, 06:14 AM)Amanda Wrote: Hello Everyone!
Herein I have one questions need your guys help.
Currently we're develop APS and HVOF on the inner wall of some cylindric or cone productions coating.
Because that the parts are too small to use the normal plasma spray and hvof spray gun,
(For Plasma spraying on inner wall,the ID is appr. 120mm)
(For HVOF coating on cone inner wall, the largest ID is appr. 90mm, Length=90mm appr.)
Does anyone know if there are smaller APS and HVOF guns(Better Sulzer Metco gun) which can suitable for the parts for robotic coating?
Or are there any other method to perform coating on those small parts?

Thanks.

Amanda

Stephen James Booth
www.ipsteknokraft.com
www.teknokraft.com
Indonesia WhatsApp +6281905603262

Reply
04-15-2011, 02:28 PM,
#3
RE: coating guns on inner wall of small parts
There are several APS gun you can use, such as SG-100 extension, Sulzer Metco's F1, F210, F300. It is depends on what kind material you want to spray.
Reply
05-04-2011, 06:55 AM,
#4
RE: coating guns on inner wall of small parts
(04-15-2011, 02:28 PM)derek Wrote: There are several APS gun you can use, such as SG-100 extension, Sulzer Metco's F1, F210, F300. It is depends on what kind material you want to spray.

Hi, Derek,
Thanks alot, for APS gun, I can only chose SM gun with 9MC system, thus could you plz help to introduce some other guns for the small ID APS?

thanks!
Reply
05-04-2011, 02:12 PM,
#5
RE: coating guns on inner wall of small parts
SM 9MC system fit all the F1, F210, F300 guns.
Reply
05-05-2011, 07:43 AM,
#6
RE: coating guns on inner wall of small parts
[attachment=201]     PLS use our ID (inside deposition) gun. Min.dia 82 mm.Long 1 meter.
Look film HVOF ID Termika-3 in action on our site or clip on Youtube
NEW! Stamps repair by HVOF Termika-3! Look clips.
https://www.youtube.com/watch?v=JnSJM8wT1TI
https://www.youtube.com/watch?v=cQwQeKvF1WU


Look clip about HVOF gun Termika-3 in action:


https://www.youtube.com/results?search_q...ika-3&aq=f



Attached Files Thumbnail(s)
       
Reply
05-05-2011, 03:05 PM,
#7
RE: coating guns on inner wall of small parts
Hi Boris,

I cant open the (dead link) in my explorer, which gases can used in termika, and can you send me some info about this.

Reply
05-05-2011, 03:09 PM,
#8
RE: coating guns on inner wall of small parts
(05-05-2011, 03:05 PM)Metallurgy_eng Wrote: Hi Boris,

I cant open the (dead link) in my explorer, which gases can used in termika, and can you send me some info about this.

Hi
Yes,give me your e-mail.
Rgrds
Boris


O2,propan ang pressure air

Reply
03-09-2017, 04:08 AM, (This post was last modified: 04-17-2017, 01:21 PM by Vig.)
#9
RE: coating guns on inner wall of small parts
Kermetico HVAF and HVOF ID guns are reliable for ID 80 mm and larger

Regards,
Vig

Reply
03-13-2017, 09:08 AM,
#10
RE: coating guns on inner wall of small parts
Hi Amanda

The only one APS torch for ID diameters below 50 mm, till now produced and which works well, is MINI ID APS GUN, this gun operate up to 15 KW, it spray with an angle of about 45°, the minimum ID diameter that could be coated is about 38 mm, and can be updated to all APS systems
Best regards
Luigi
Reply
04-02-2017, 06:18 AM,
#11
RE: coating guns on inner wall of small parts
(05-05-2011, 03:05 PM)Met.Eng. Wrote: Hi Boris,

I cant open the (link dead) in my explorer, which gases can used in termika, and can you send me some info about this.

https://www.youtube.com/watch?v=SRRI4nCPAA8
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Too many small particles in my coating devil72 1 428 08-04-2020, 11:54 AM
Last Post: Vadim Verlotski
  Coating of carbon fiber parts gp1nick 2 1,177 08-20-2019, 01:03 PM
Last Post: loriolo
  Flame spray guns 5P, 5PII, Type N Hector Monjardin 1 2,210 11-17-2016, 10:35 PM
Last Post: mgbaca
Question Drawings of spare parts for different guns mgbaca 1 1,559 10-12-2016, 10:14 PM
Last Post: plasmajet1990
  Spray on a small hole Spark 2 2,581 08-13-2014, 02:20 PM
Last Post: JustSprayGuy
Lightbulb Ceramic Coating of Internal Diameters and Small Precision Parts Refmet 0 3,763 07-08-2014, 01:07 PM
Last Post: Refmet
  Problems to coat small spheres with APS Victor Rubio 9 5,930 03-19-2014, 02:45 AM
Last Post: Victor Rubio
  Coating Small interrupted surfaces Fat Dragon 4 3,033 10-27-2013, 10:31 PM
Last Post: loriolo
  extraction for arc spraying aliminium titanium in small spaces JNRT 0 1,769 10-05-2013, 09:46 AM
Last Post: JNRT
  HVOF coating the bores of thin wall sleeves SDA 5 6,070 06-27-2011, 04:51 AM
Last Post: kschewe
  Please recommend me what kind of plasma guns available to be used. Lucas 6 5,839 06-20-2011, 05:51 AM
Last Post: Lucas
  Coating of coal Boiler tube wall iwan-sedaryawan 6 7,356 05-10-2011, 07:16 AM
Last Post: A.Termika Ltd
  Coating toTube Wall Furnance iwan-sedaryawan 4 5,172 04-04-2010, 10:40 AM
Last Post: loriolo
  HVOF Small-ID Spraying ykang 10 11,731 10-27-2009, 04:37 PM
Last Post: k09
  Thermal spray coating for Chimney inner wall jeffsays163 1 5,134 01-12-2008, 05:08 PM
Last Post: Vijay Deshpande



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd