"cannot insert any more instruction in job" error on robotic arm
02-04-2020, 08:44 PM,
#1
"cannot insert any more instruction in job" error on robotic arm
Hi all,
We are spraying a pretty complex surface and have been putting in a lot of lines into the robotic arm program (Motoman). However, we've run into a problem where the robotic arm will not accept any more lines with the error, "cannot insert any more instruction in job." We've tried removing other programs to make room but it doesn't seem to be a memory problem. Does anyone have advice on how to get around this problem?
I'd appreciate any advice, thank you!
Reply
02-04-2020, 09:51 PM,
#2
RE: "cannot insert any more instruction in job" error on robotic arm
(02-04-2020, 08:44 PM)ThermalSprayingPhysicist Wrote: Hi all,
We are spraying a pretty complex surface and have been putting in a lot of lines into the robotic arm program (Motoman). However, we've run into a problem where the robotic arm will not accept any more lines with the error, "cannot insert any more instruction in job." We've tried removing other programs to make room but it doesn't seem to be a memory problem. Does anyone have advice on how to get around this problem?
I'd appreciate any advice, thank you!

Make other jobs that you call from the main job...break it up into smaller jobs.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  JP 5000 Instruction Manual RV_DMG 0 6,653 11-25-2014, 03:45 PM
Last Post: RV_DMG



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd