bond test adhesive

[Madila Awalini]

Posted by Joel Voyer (62.218.164.126) on 12:30:59 29/05/06

I am looking for an adequate bond test adhesive for performing adhesion tests on flame sprayed coatings. Could anyone recommend me such an adhesive ?
Thanks


Mr. Voyer,

I have a recommendation to use the following type of adhesive for testing the flame sprayed coating :
Materials : Adhesive film of FM 1000 type
Suggested Curing Cycle : 350 - 400oF (177 - 204oC) for 1 - 3 hours.
This is taken from the manual of repair process of aircraft engines.

Regards,
Madila