acetylene cylinder heating blankets
12-05-2014, 12:51 PM,
#1
acetylene cylinder heating blankets
anyone have any issues with the use of acetylene cylinder heating blankets?
Is it safe to heat up acetylene cylinders to 120 degrees Fahrenheit?
Will it change the flame parameters?
Reply
12-09-2014, 07:31 AM,
#2
RE: acetylene cylinder heating blankets
Dear Chromalloy:

Sounds very dangerous to me! Typically the maximum working pressure of Acetylene in gaseous form is 15PSI in most countries. Exceeding 15 psi its my understanding that acetylene is unsafe, and the molecule is unstable, hence explosive.

Thats why acetylene is disolved into acetone in the cylinder, something like carbonated drink...

Maybe others can add....
Reply
12-20-2014, 08:21 AM,
#3
RE: acetylene cylinder heating blankets
I agree with Stephen, it's very unsafe to do modifications on gas net, without advices from a gas specialist, as surely you use a flame gun, with volumetric flow meter, parameters could change if room temperature change, that is the reason to have a constant room temperature, or use mass flow meter.
Best regards
Luigi
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  SPM for MG cylinder Vijay Deshpande 11 16,652 02-23-2023, 02:18 PM
Last Post: adam wintle
  Inconel 625 Plasma Sprayed Compressor Cylinder (ID) demionkrishan 4 3,052 06-17-2019, 01:32 PM
Last Post: demionkrishan
  acetylene flow limits for flame spray metco 6c chromalloymachi112 1 4,202 12-04-2014, 12:18 AM
Last Post: Met.Eng.
  Consumables for cylinder block made of grey cast A_Hanert 2 4,152 06-25-2014, 10:19 AM
Last Post: A_Hanert
  coating Al cylinder for wear resistance sal 7 8,279 09-08-2012, 06:58 AM
Last Post: sal
  High Pressure Cylinder Compressor Walls Repair HVoilF 2 6,476 05-29-2012, 09:54 PM
Last Post: HVoilF
  HVOF Powder for Block Engine and Cylinder Liner minh_8888 1 4,409 06-21-2011, 02:28 PM
Last Post: Met.Eng.
  GTV GLC HVOF TopGun acetylene pressure and flows Met.Eng. 2 8,244 01-17-2011, 06:11 PM
Last Post: Gordon
  Powder pre-heating Met.Eng. 2 4,966 10-21-2010, 02:46 AM
Last Post: kschewe
  Hv2000 or Top Gun with acetylene Intel55 9 16,096 09-12-2010, 09:12 AM
Last Post: asinmaz
  Heating powder feeder landemarre 4 7,476 12-15-2008, 03:04 PM
Last Post: Steph
  coating cylinder heads mitch 5 7,229 10-07-2008, 03:15 AM
Last Post: mitch



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd