Which powder can be applied on base structure A351-CF8M
01-05-2011, 07:54 AM,
#1
Which powder can be applied on base structure A351-CF8M
Dear Sir,
We have a hydraulic Pump of Flowserve. Some damages occurs inside. We intend to coat the surface by HVOF.
Please advise us which powder can be used in this case. The pump casing material is ASTM A351-CF8M.
The HVOF equipment is Termika -3 from Israel.
Look froward to receive your help.
Thanks so much.


Nguyen Hong Minh - Vietnam
Skype: minh_8888
Reply
01-06-2011, 08:24 PM,
#2
RE: Which powder can be applied on base structure A351-CF8M
You need more information than what is given here to determine what material is most suitable, but if I'm not mistaken that is a 300 series stainless alloy. Where in the pump are the damages taking place, and what appears to be causing it?

The root cause of the problem is the path to the ideal material, not the metallurgy of the failed component. Theoretically if the original material was the correct choice, then you wouldn't have the problem (unless it was an abhorration/process upset, etc.).
Reply
01-14-2011, 08:15 PM,
#3
RE: Which powder can be applied on base structure A351-CF8M
Hi minh_8888

Sign0016 to the Surface Engineering Forum.

I will echo what MichiganMan said Smile
Reply
01-18-2011, 08:00 AM, (This post was last modified: 01-18-2011, 08:00 AM by minh_8888.)
#4
RE: Which powder can be applied on base structure A351-CF8M
Hi there,
Thanks for your advise.
Please be explained that our guys have caused some damages by using portable grinding machine. Now we need to coat the inside pump by material with the equivalent specs.
The pump has been using in fertilizer plant.
The component of pump casing is: (link dead)
Look forward to receive your help soon
Nguyen Hong Minh
Hi there,
Thanks for your advise.
Please be explained that our guys have caused some damages by using portable grinding machine. Now we need to coat the inside pump by material with the equivalent specs.
The pump has been using in fertilizer plant.
The component of pump casing is: (link dead)
Look forward to receive your help soon
Nguyen Hong Minh
Reply
01-19-2011, 05:23 PM,
#5
RE: Which powder can be applied on base structure A351-CF8M
Hi minh_8888

The closest of the shelf powder I think will be a 316 stainless steel.

ASTM A 351/CF8 - 0.08% C, 19% Cr, 10% Ni, 2% Mo
AISI 316 - 0.08% C, 17% Cr, 12% Ni, 2.5% Mo
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Video Repair of base material defect after HVOF Coating Pranab_hvof 2 4,604 06-27-2022, 12:20 PM
Last Post: sushil1405
  Ceramic Coating on Aluminum Base metal demionkrishan 9 4,758 02-03-2020, 09:35 AM
Last Post: DMan
  WC-CO-CR hvof coating thickness measurement on Base SS 316L JRB VIRANI 3 3,110 06-20-2019, 09:16 AM
Last Post: loriolo
  TSA coating applied to 316L pipe MIKEOKEEFE63 2 5,002 06-10-2019, 07:25 PM
Last Post: JRB VIRANI
  Good preparation for cast iron base material plzc126330 3 4,167 11-24-2016, 01:17 AM
Last Post: plzc126330
  Spray and Fuse Co-base or Ni-base alloy on Inconel 718 Frank 1 4,236 09-23-2012, 01:12 PM
Last Post: Gordon
  EUTECTIC STRUCTURE Madila Awalini 3 15,213 02-19-2012, 12:38 PM
Last Post: ahmadsahid
  Repair Pump Shaft on Base Material Nitronic50 Piyapong 1 4,793 03-03-2010, 05:53 PM
Last Post: djewell
  Coating applied in paper pulp filter? Garyn 4 5,765 07-14-2009, 06:15 PM
Last Post: djewell
  Can plasma be applied to coated substrates? Steph 4 7,448 10-10-2008, 06:25 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd