WCCOCR coating with plasma
03-05-2012, 05:24 AM,
#1
WCCOCR coating with plasma
dear members
we are coated tungsten carbide cobalt chrome with plasma but in the coating we have observed so much of porosity and low hardness (50Rcmax) simultaneously we have coated with hvof also in this process there is no porosity hardness we have not checked i think it will give better hardness.
can any body tell the plasma parameters for wccocr. we are not found the plasma parameter for this coating. please suggest me.
Reply
03-08-2012, 03:53 PM,
#2
RE: WCCOCR coating with plasma
Hi srihan_1

We would require more information on equipment, powders and parameters used to be able to help.

"low hardness (50Rcmax)" Sorry, to me this is pretty much meaningless as you should not test a WC/CoCr coating using Rockwell C. If it is converted from another hardness test, again it is not very useful without knowledge of details of original test and conversion formula/tables used.

Reply
03-12-2012, 11:15 PM,
#3
RE: WCCOCR coating with plasma
Powder selection and spray process are important for Wc/Co/Cr applications in order to have a specific surface finish requirements and technological issues as porosity, higher quality coating are generally achieved using HVOF process, some time it’s possible to obtain an acceptable quality coating using high energy plasma With Ar/He plasma gas and supersonic nozzle, there is some materials with low Wc and Co/Ni, performed to use with plasma spray with self-fusing proprieties.
Best regards
Luigi
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  HVOF WcCoCr Sealant SSC 13 9,586 09-07-2020, 10:29 PM
Last Post: loriolo
  High porosity in WcCoCr demionkrishan 4 1,769 02-24-2019, 06:16 PM
Last Post: loriolo
Lightbulb HVAF vs. HVOF WCCoCr Vig 19 8,033 06-05-2017, 12:05 PM
Last Post: Vig
  Al2O3-TiO2 on Wccocr Joris Kraak 2 2,019 09-21-2016, 08:52 PM
Last Post: Vig
  HVOF WCCoCr Coating defect Patrick K 5 6,772 05-25-2012, 10:08 PM
Last Post: pakalano
Question Tantalum and WcCoCr coatings TintinMilou 7 10,100 09-13-2007, 12:53 AM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd