Tungsten Carbide HVOF Removing.
10-14-2008, 07:37 PM,
Tungsten Carbide HVOF Removing.

I am looking for how to remove full coating WOKA 3602 HVOF process.

Two cases diferents substrates:

DIN 1.2379.
Cast Iron GGG70.

I'm Thincking try remove by machining. But i do not know how impact residual stress in the substrate. If can we have any risk??

Thank you for your attention
10-15-2008, 04:17 AM,
RE: Tungsten Carbide HVOF Removing.

Machining is definitely the best and fastest way. Alternative maybe waterjet.
Depends on the coating thickness, part configuration, the machining method, (single point cutting ..etc) the rotating speed if your part is a cyclindrical shape, ID/OD or on flanges where the coating deposit.
12-04-2008, 04:03 PM,
RE: Tungsten Carbide HVOF Removing.
you can remove some carbide coatings chemically, although there are only a few people that can do it in the uk due to the amount of cyanide (i believe) that is used. alternatively you can use a reverse electrolitic process to remove some tungsten carbide coatings. The key factor in stripping this sort of coating seems to be destroying the binding agent (cobalt in the case of 86/10/4, quite possibly in others also)

depends on the application really, i know we have to strip parts from time to time, and there is no real way you could machine the coating off (our parts) practially.

Possibly Related Threads…
Thread Author Replies Views Last Post
Photo Pitting in HVOF Tungsten Carbide mrobie 3 257 05-07-2022, 06:13 PM
Last Post: Vadim Verlotski
  Tungsten Carbide Microfinish engineerraj 13 14,090 12-29-2021, 09:00 AM
Last Post: Stephen Booth
  Request for solution to reduce porosity in HVOF Tungsten Carbide Coatings sreenuvundela 7 10,806 07-22-2020, 08:01 AM
Last Post: Simon Kim
  Chromium carbide parameters for HVOF JP500 Jaryn 2 1,900 07-01-2020, 04:27 PM
Last Post: ap-praxair
  Tungsten Carbide HVOF Removal PrecisionCarbide 9 11,484 02-24-2020, 11:17 AM
Last Post: Packiaraj Mutharasu
  roller surface high roughness Tungsten carbide coating Ra 0.15-0.3mm zhuminkun 6 3,743 02-08-2019, 04:59 AM
Last Post: Taz
  Dark surface after grinding of plasma tungsten carbide coating Lazha 1 2,952 05-31-2017, 12:07 PM
Last Post: loriolo
  HVAF tungsten carbide to replace hard chrome - Help??!!! Adamreis 2 3,265 02-20-2017, 11:04 PM
Last Post: Vig
  Effective Way of Testing hardness of Tungsten Carbide MANGESH 2 6,064 12-03-2015, 09:25 PM
Last Post: alaskangrown
  Tungsten Carbide coatings Sealants sorousheti 5 6,458 11-23-2015, 10:18 AM
Last Post: sorousheti
  Cold Spray with Tungsten Carbide LLBHW 3 11,632 04-24-2015, 01:06 AM
Last Post: Fermit
  HVOF Tungsten Carbide - New Line Setup David 1 4,274 08-16-2014, 03:51 PM
Last Post: Gordon
  Tungsten Carbide HVOF Coated Ball Valves grinding and Lapping constraints --- Reg sreenuvundela 4 10,313 07-29-2013, 09:04 AM
Last Post: Met.Eng.
  Buffer or build up layers under HVOF Carbide Coatings Stephen Booth 12 17,065 05-19-2011, 11:00 PM
Last Post: Met.Eng.
  Tungsten Carbide coating Guna 1 5,759 05-25-2010, 07:54 PM
Last Post: Gordon

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd