(06-22-2009, 07:55 PM)Gordon Wrote: Hi Cygu
to the Surface Engineering Forum.
Good luck with finding a source.
May help if you specify particle size and composition or intended use.
Thanks for warm welcome and hello Gordon.
About Ti-Al powder I am interested in -200 to -350 mesh size. Possibly close to 50/50 % chemical composition. I can accept 10% difference (to 40/60 both sides).
Powder will be used in research project at Technical University of Warsaw at section Materials Science & Engineering.
Maximum quantity order around 5 kg. I am in need of 0,5 kg right now but as well can purchase bigger amount in advance. I know some companies have they minimum quantity order so thats why.
Best regards,
Cygu.