Thermal Spray Tolerance Limit
12-16-2016, 08:16 AM,
Thermal Spray Tolerance Limit
Thermal Spray Tolerance Limit

I have a question on the tolerance capability level for thermal spray processes
.I would like to know, what is the best tolerance (i.e. +/- 0.00x) that can be achieved with HVOF or Air Plasma?

For my process
1. APS - I could achieve a deposition rate in the range of 0.001"~0.003" per pass.
2. HVOF - I could achieve a deposition rate in the range of 0.00025 ~0.0005
Any information would be appreciated!


12-17-2016, 10:55 PM,
RE: Thermal Spray Tolerance Limit
Hi Alex

It seems that you need some little training, every material has his own deposition rate, as well as it is an important issue to consider during the parameters selection for every powder, of course ther isn't a global or best general deposition range.
Best regards

Possibly Related Threads…
Thread Author Replies Views Last Post
  Powder stabilization time and coating time limit nicholasktc 1 1,096 06-25-2020, 12:59 PM
Last Post: Lemster68
  Surface contact stress limit over an HVOF coating HVoilF 1 4,257 05-22-2013, 02:07 PM
Last Post: djewell
  center line tolerance. RVRTRSH 5 6,664 11-02-2009, 04:24 PM
Last Post: RVRTRSH
  Thermal Spray Tolerance Limit Alexangel1226 8 13,030 12-24-2007, 06:46 PM
Last Post: hvofhamid

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd