The ratio of oxygen to fuel of Jet kote III
06-03-2010, 03:40 PM, (This post was last modified: 06-03-2010, 03:50 PM by wangqun72.)
 wangqun72 Member Posts: 6 Threads: 3 Joined: Dec 2009 Reputation: 0
The ratio of oxygen to fuel of Jet kote III
Hi everyone ,I am a user of Jet kote III HVOF system in China, the suggested paramete for WC/12Co powder by Deloro Stellite Co. Inc is as fellow :the flux of C3H6 is 133SCFH , flux of oxygen is 1010 SCFH and the carry gas of Ar is 57 SCFH.The JK112 coating deposited by using the suggseted paramete was crack, Can you tell me the reasons for occurrence of this cracking phenomenon. What's more, as you know ,C3H6+4.5O2=3CO2+3H2O,the oxygen to fuel is 1010/(133*4.5)=1.6786, why the oxygen is set to so high level.
06-04-2010, 02:02 AM,
RE: The ratio of oxygen to fuel of Jet kote III
Hi wangqun72

to the Surface Engineering Forum.

Quote:Can you tell me the reasons for occurrence of this cracking phenomenon.

There could be many. We would need much more information about your process set-up, the nature of the cracks and when they occur to really get an idea of your problem.

Quote:Whatâ€™s more, as you know ,C3H6+4.5O2=3CO2+3H2O,the oxygen to fuel is 1010/(133*4.5)=1.6786, why the oxygen is set to so high level.

No direct experience with Jet kote III HVOF system. But with SM Diamond jet with propylene for WC/Co type coatings the figure is more like 0.80 (oxygen for complete combustion). This equates roughly to the maximum flame temperature. So, I too feel your oxygen level is high.
06-04-2010, 01:19 PM,
 derek Senior Member Posts: 89 Threads: 7 Joined: Oct 2006 Reputation: 3
RE: The ratio of oxygen to fuel of Jet kote III
I have experence on JP5000 and K2 gun, the Keronsene and O2 ratio we use is 1.1-1.3, never use 1.6 defore.
06-05-2010, 06:43 AM, (This post was last modified: 06-05-2010, 06:53 AM by wangqun72.)
 wangqun72 Member Posts: 6 Threads: 3 Joined: Dec 2009 Reputation: 0
RE: The ratio of oxygen to fuel of Jet kote III
(06-04-2010, 01:19 PM)derek Wrote: I have experence on JP5000 and K2 gun, the Keronsene and O2 ratio we use is 1.1-1.3, never use 1.6 defore.

Hi ,derek,I have experence on JP5000 too,mostly the parameters I usually used were :keronsene flux :6.5GPH,Oxygen flux:1950SCFH,spray distance:330mm and the feed rate : 76 g/min for WC/Co(15~45um) powder,the good coating can be obtained.According to this,the fuel/oxygen is about 0.9.

Dear Gordon ,Thanks for your reply,by the way, could give me your E-mail,I can send photo of detail results to you, including spray parameter microhardness and microstructure.My e-mail:wangqun72@163.com
06-06-2010, 02:58 PM,
RE: The ratio of oxygen to fuel of Jet kote III
Hi Wangqun72

If you click on the username of a member you should find contact information.

I tend to prefer to keep discussions open on the forum. Once they go private, they are obviously only of use to the individual/company and in this scenario should be treated in professional business terms.
09-02-2010, 06:18 PM,
 wangqun72 Member Posts: 6 Threads: 3 Joined: Dec 2009 Reputation: 0
RE: The ratio of oxygen to fuel of Jet kote III
Thanks for all the replies!
The most suitable ratio of O2 and C3H6 for Jet kote III is about 7.5 which is not like the DJ 2700 and other spraying gun.

Wang qun

 Possibly Related Threads… Thread Author Replies Views Last Post Green flame in HVOF hydrogen - oxygen combustion JeroenB 3 941 05-07-2021, 01:24 PM Last Post: JeroenB Oxygen purity gito 0 1,013 06-17-2019, 06:03 AM Last Post: gito Oxy-fuel wire spray gun questions hje 5 2,829 01-26-2019, 05:58 PM Last Post: plasmajet1990 Jet kote gun leakage problem Hector Monjardin 0 2,303 11-18-2015, 04:24 PM Last Post: Hector Monjardin Liquid fuel hvof testing Parat Tech 0 2,548 05-19-2015, 10:50 AM Last Post: Parat Tech Why Liquid fuel is better than Gas fuel in HVOF? dibyendudhara 3 11,557 12-30-2013, 02:36 PM Last Post: derek Stoichiometric ratio calculation for JP 5000 Lalit 3 5,691 06-13-2013, 07:33 PM Last Post: Intel55 Calorized and Ceramics Coating Oxygen Lance Pipe iwan-sedaryawan 0 3,636 03-04-2013, 03:42 PM Last Post: iwan-sedaryawan DJ2700 low fuel gas flow guang 1 3,352 12-23-2012, 04:30 PM Last Post: Gordon DJ 2700 is oxygen temperature important? Thomas 3 4,523 11-01-2012, 10:16 AM Last Post: davclark JP5000 Oxygen KevGarty 0 2,456 09-24-2012, 07:42 AM Last Post: KevGarty Stellite Jet Kote - Green flame? farmcop1 4 5,709 05-29-2012, 07:25 PM Last Post: farmcop1 Stoichiometric fuel ratio =λ Met.Eng. 1 9,349 01-14-2011, 08:44 PM Last Post: Gordon Jet kote III orthogonal spray parameters query wangqun72 6 7,933 09-05-2010, 05:57 AM Last Post: k09 Coating for Pressurized Liquid Oxygen jsheridan 6 7,911 11-21-2009, 06:35 PM Last Post: Gordon

Users browsing this thread: 1 Guest(s)