Technical Bulletin of Metcoloy 2 wire
05-20-2014, 08:31 PM,
#1
Technical Bulletin of Metcoloy 2 wire
Hi,

Is any body have technical bulletin of metcoloy 2. I want to know some propertis about this wire

-Bonding properties (selfbonding or need bond coat)
-thickness properties
-hardness
-application areas (we want to apply this wire on 5000-8000 rpm shaft on bearing surface, this shaft beared in babbit)* or suggest other wire
-I,V and air parameters

Thanks
Reply
05-21-2014, 03:05 AM,
#2
RE: Technical Bulletin of Metcoloy 2 wire
Here you go, as you can see not too many details



.pdf   Metcoloy 2 10-023 (1).pdf (Size: 85.1 KB / Downloads: 8,753)
Stephen James Booth
www.ipsteknokraft.com
www.teknokraft.com
Indonesia WhatsApp +6281905603262

Reply
05-21-2014, 05:54 AM, (This post was last modified: 05-21-2014, 06:01 AM by plasmajet1990.)
#3
RE: Technical Bulletin of Metcoloy 2 wire
(05-20-2014, 08:31 PM)Metallurgy_eng Wrote: Hi,

Is any body have technical bulletin of metcoloy 2. I want to know some propertis about this wire

-Bonding properties (selfbonding or need bond coat)
-thickness properties
-hardness
-application areas (we want to apply this wire on 5000-8000 rpm shaft on bearing surface, this shaft beared in babbit)* or suggest other wire
-I,V and air parameters

Thanks

Hi,

I have : Metcoloy® #2
420 Type Stainless Steel Wire
Technical Bulletin #10-626
(1997), send me your email address.

Ion
(05-20-2014, 08:31 PM)Metallurgy_eng Wrote: Hi,

Is any body have technical bulletin of metcoloy 2. I want to know some propertis about this wire

-Bonding properties (selfbonding or need bond coat): =55 MPa, 8000 Psi
-thickness properties: < 1,27 mm
-hardness: 450 - 600 HV03
-application areas (we want to apply this wire on 5000-8000 rpm shaft on bearing surface, this shaft beared in babbit)* or suggest other wire
-I,V and air parameters

Thanks

Reply
05-21-2014, 06:28 AM,
#4
RE: Technical Bulletin of Metcoloy 2 wire
Thanks your post. We want to apply this wire on Bearing area. We have 2 different wire to apply this application. First one is 420 Stainless steel and the other one is 414 Stainless Steel. Do you any experiances about 414 Grade ? I think 414 Grade hardness is higher 420 grade. Is any body use 414 with arc spray? Or Can you suggest other wires for bearing area?
Reply
05-21-2014, 08:14 AM, (This post was last modified: 05-21-2014, 08:24 AM by Stephen Booth.)
#5
RE: Technical Bulletin of Metcoloy 2 wire
You have not really given many details on the application, what is the machine, the component, what diameters, loading, volume of parts, etc.

However assuming its a normal shaft repair, in a bearing area, a bond coat of a NiAl material, followed by 420 should work.

Other factors could be more important than the coating wire, like parameters, surface prep, skilled operator, and critical in my opinion, is Belt Grinding or Stone grinding of the 420 SS to achieve the proper surface, and dimension.
Stephen James Booth
www.ipsteknokraft.com
www.teknokraft.com
Indonesia WhatsApp +6281905603262

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Technical Characteristics of Rich Laser Cladding Technology lijianping 0 2,194 05-17-2014, 06:15 AM
Last Post: lijianping
  Metco Technical Bulletins plasmajet1990 2 6,364 02-13-2013, 01:53 PM
Last Post: loriolo
  Metco 206A Technical Bulletin plasmajet1990 0 2,193 02-11-2013, 08:58 PM
Last Post: plasmajet1990
  twin wire arc spraying equipment for stainless steel wire, monel wire, etc. technovel 6 10,635 08-01-2008, 11:59 AM
Last Post: adam wintle



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd