TSA coating applied to 316L pipe
03-25-2015, 10:57 PM,
#1
TSA coating applied to 316L pipe
Searching for a DFT gauge capable of reading Thermal Sprayed Aluminum Coating thickness on 316L Pipe. The Fischer Phascope PMP10 w/ESD20Zn probe apparently is capable however I cannot find any back-up to support this.
Looking for any information/confirmation/experience regarding this particular unit for Thermal Sprayed Aluminum Coating thickness on 316L Pipe....any alternative equipment referrals would also be appreciated.

Thanks,
Mikeokeefe63
Reply
03-26-2015, 11:18 PM,
#2
RE: TSA coating applied to 316L pipe
Hi Mike
I settled an TSA coating on 316, and it was possible to measure the coating, with an NDT ultrasonic gauge, the problem was the thickness differences in the base metal, but we measured first base metal thickness and after TSA coating, I measured the total thickness (base material plus Al coating), in the same place, and you can obtain TSA thickness for difference.
Best regards
Luigi
Reply
06-10-2019, 07:25 PM,
#3
RE: TSA coating applied to 316L pipe
(03-26-2015, 11:18 PM)loriolo Wrote: Hi Mike
I settled an TSA coating on 316, and it was possible to measure the coating, with an NDT ultrasonic gauge, the problem was the thickness differences in the base metal, but we measured first base metal thickness and after TSA coating, I measured the total thickness (base material plus Al coating), in the same place, and you can obtain TSA thickness for difference.


i have applied 86WC10Co4CR hvof coating on SS 316 ,how can i measure coating thickness ????whch kind of DFT meter will be helpful ??/ i have tried with eddy current based and electromagnetic based DFT meter but none of them give me perfect result..

thanks in advance
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  WC-CO-CR hvof coating thickness measurement on Base SS 316L JRB VIRANI 3 1,253 06-20-2019, 09:16 AM
Last Post: loriolo
  Stainless steel pipe coating larsen 1 4,791 09-07-2013, 01:23 PM
Last Post: Ryley5566
Lightbulb How to make hollow ceramic pipe Kaoru 3 4,102 07-19-2013, 01:20 PM
Last Post: markspend01
  Calorized and Ceramics Coating Oxygen Lance Pipe iwan-sedaryawan 0 3,169 03-04-2013, 03:42 PM
Last Post: iwan-sedaryawan
  Which powder can be applied on base structure A351-CF8M minh_8888 4 5,791 01-19-2011, 05:23 PM
Last Post: Gordon
  Shot peening and increase in Stainless 316L hardness? bry1975 3 9,282 11-30-2009, 03:22 PM
Last Post: Grettir
  Coating applied in paper pulp filter? Garyn 4 4,326 07-14-2009, 06:15 PM
Last Post: djewell
  producing of seamless pipe Arturas 1 2,996 12-16-2008, 06:59 PM
Last Post: Gordon
  Can plasma be applied to coated substrates? Steph 4 5,961 10-10-2008, 06:25 PM
Last Post: Gordon
Question SS 316L Coating thickness measurement sumant 4 11,611 07-20-2007, 04:42 PM
Last Post: bhellman



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd