TAFA 45 CT arc spray coating
08-12-2013, 04:28 PM,
#1
TAFA 45 CT arc spray coating
Hi All,

What would the effect on a TAFA 45 CT type 250 micron thick coating if cleaned using water jet blasting at 600 kg/cm2 pressure = 8400 psi pressure -in terms of coating bonding to the substrate assuming the coating is applied on a well blasted surface using TWIN ARC

Regards

Shantanu Newar
Reply
08-13-2013, 12:36 PM,
#2
RE: TAFA 45 CT arc spray coating
Hi Shantanu

First, my hands on experience with water jet cleaning/coating stripping is minimal, so please take what I say with a pinch of salt Rolleyes

Water jet coating stripping uses pressures around 30,000 - 60,000 psi. While your 8400 psi is well below this level it may still damage/erode the coating. I think you need to run some tests to satisfy yourself how your coating will stand up to this cleaning process and at what level of exposure.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  TAFA 9000 Arc Spray Globalteknik 4 5,356 11-20-2018, 01:59 PM
Last Post: Stef1903
  Coating on Boiler tube in Coal Fired Power Plan by using Tafa wire 97MXC Iwan Sedaryawan CA 4 6,661 04-21-2017, 03:17 PM
Last Post: J!m



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd