T800 parameter
03-07-2019, 01:48 AM,
#1
T800 parameter
Hi All;

Is there anyone willing to share an aerospace quality parameter for Metco 68F-NS-1 sprayed with the F4 plasma gun? I'm looking for a parameter with less than 180μin roughness and with HR15N in excess of 82 when sprayed from .009 - .013" total thickness.

I have tried METCO parameters, but the effect is not good.

Thanks in advance.
Reply
03-14-2019, 09:42 AM,
#2
RE: T800 parameter
Dear Ping Cheng
Many years ago I must do process T800 qualification, and it was very hard to accomplish with GE SPEC F50TF45CLB specification with 68F NS-1, we try with other OEM powders like Pac 800, FST M-499 and CO111, and the result was better, some time OEM in order to win money, sell powders with too much fines, and you pay for powders that goes on the air instead to do a coating
Best regards
Luigi
Reply
03-14-2019, 09:56 AM,
#3
RE: T800 parameter
(03-14-2019, 09:42 AM)loriolo Wrote: Dear Ping Cheng
Many years ago I must do process T800 qualification, and it was very hard to accomplish with GE SPEC F50TF45CLB specification with 68F NS-1, we try with other OEM powders like Pac 800, FST M-499 and CO111, and the result was better, some time OEM in order to win money, sell powders with too much fines, and you pay for powders that goes on the air instead to do a coating

dear Luigi

I will discuss it with my supervisor.
Thank you for your help.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Same parameter Different Pressure 5220 HP gun, HVOF Hoon Lee 1 204 02-04-2025, 02:30 PM
Last Post: demionkrishan
  F4 plasma parameter Liamm 1 947 12-22-2023, 05:05 PM
Last Post: ServiceTech
  HVOF T800 Tensile Bond Strength issue wgg237 3 6,796 09-11-2023, 09:18 AM
Last Post: Sail L
  SG-100 PLasma Parameter Met.Eng. 0 1,176 07-30-2023, 05:26 PM
Last Post: Met.Eng.
  parameter DJ GUN 2700 gito 0 2,593 03-26-2019, 03:28 AM
Last Post: gito
  Parameter Stellite 6 HVOF DJ2600 achmadarifudinh 0 2,990 12-07-2018, 01:36 AM
Last Post: achmadarifudinh
  MO wire spray parameter for 3GF kim jong hun 2 3,534 04-29-2018, 01:00 PM
Last Post: kim jong hun
  HVOF JK parameters for T800 plyer 8 14,886 07-27-2017, 01:41 PM
Last Post: technovel
  T800 coating delamination alvliew 5 6,349 05-05-2017, 02:54 AM
Last Post: KevinS
  601NS single cathode parameter J!m 1 3,311 08-15-2016, 01:58 PM
Last Post: plasmajet1990
  Qualifying T800 to F50TF45 Class A mmgerrie 4 7,276 12-23-2015, 03:38 AM
Last Post: alvliew
  HVOF parameter for WCCo + CoNiCrAlY Guna 2 5,654 10-09-2012, 06:54 PM
Last Post: Spraytube
  problems with T800 HVOF stokee 22 43,219 08-13-2012, 10:08 AM
Last Post: wgg237
  HVAF and T800 mark ainsley 5 8,709 03-30-2012, 09:50 PM
Last Post: djewell
  W121 coating - Parameter Problem ir_minja 1 6,228 02-21-2011, 07:25 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd