Surface roughness TBC topcoat
03-26-2007, 08:56 AM,
#1
Surface roughness TBC topcoat
Hi all,

First of all I would like to say this is a very interesting and useful forum. It would be great to have such a forum for every discipline of (mechanical) engineering.

My questions are about the surface roughness of TBC for industrial gas turbines.

-What roughness (Ra, Rz, Rmax, ...) values are used for turbine vanes and blades?
-Which processes are used to reach these values (grinding, blasting, vibratory finishing...)?
-Is efficiency the only reason to decrease the roughness? Or are there other (material) characteristics (like life cycle) positively influenced by lowering the roughness?

Many thanks for your replies.

Best regards,

Rogier Vermeulen
Student mechanical engineering
Reply
04-03-2007, 12:15 PM,
#2
RE: Surface roughness TBC topcoat
Hi Rogier

Sign0016 to the Surface Engineering Forum.

This link may be of interest.
Reply
04-11-2007, 11:31 AM,
#3
RE: Surface roughness TBC topcoat
Gordon Wrote:Hi Rogier

Sign0016 to the Surface Engineering Forum.

This link may be of interest.
Thanks Gordon.

If someone has more information, especially about the importance of the different Roughness values (Ra, Rz, Rmax, ...), it would be very much appreciated.

Regards,

Rogier
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  roller surface high roughness Tungsten carbide coating Ra 0.15-0.3mm zhuminkun 6 2,485 02-08-2019, 04:59 AM
Last Post: Taz
  Coating surface roughness William 9 21,045 12-26-2017, 10:40 AM
Last Post: Vadim Verlotski
  Copper wire arc spray surface roughness operator 10 7,950 09-10-2013, 09:06 AM
Last Post: Esteban
  Surface roughness after grit blasting Leanne 8 21,782 08-15-2012, 05:28 AM
Last Post: Leanne
  Diamalloy 2004 surface roughness problem Khairul Anwar 1 4,350 07-12-2011, 10:10 AM
Last Post: Gordon
Star Improving Surface Roughness of Polypropylene and Measuring Surface Roughness kat.rawlings 14 23,123 03-01-2011, 09:18 AM
Last Post: kat.rawlings
  Obtaining surface roughness requirement (and hardness > 1000 HV) vrakpant 3 5,925 04-25-2010, 01:37 PM
Last Post: Gordon
  Surface Roughness prashanth 2 4,212 03-03-2009, 11:32 AM
Last Post: karunanidhi
  Porous Machined Surface on Part Lower Inner Diameter on Inco 718 Coating Surface Alexangel1226 4 7,160 03-19-2008, 02:05 PM
Last Post: Gordon
  Ideal Surface Roughness ruskasinthehouse 2 5,576 05-05-2007, 09:44 AM
Last Post: drramc



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd