Surface Engineering Forum › Surface Engineering › Surface Engineering Threads v
Surface prep. with Garnet instead of Al2O3




Thread Modes
Surface prep. with Garnet instead of Al2O3
05-14-2019, 05:52 AM,
#1
velocity Offline
Active Member
****
 Posts: 49
Threads: 20
Joined: May 2018
Reputation: 0
Surface prep. with Garnet instead of Al2O3
Hello
In articles and experiences i always saw Al2O3 F24, brown and i used too.

But garnet is cheaper and my supplier highly suggests me from a while. Is it useable? Which one is more economic?

Email Find
Reply
05-14-2019, 04:44 PM,
#2
Lemster68 Offline
Senior Member
*****
 Posts: 58
Threads: 2
Joined: Jul 2018
Reputation: 1
RE: Surface prep. with Garnet instead of Al2O3
Hello,

I found this when I did a google search, it mentions various abrasives for grit blasting, including Garnet.

https://www.asminternational.org/documen...c497a07efa
Find
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Craking problem in Al2O3+ TiO2 plasma coating Hector Monjardin 4 2,983 09-22-2016, 01:33 PM
Last Post: Hector Monjardin
  Al2O3-TiO2 on Wccocr Joris Kraak 2 2,092 09-21-2016, 08:52 PM
Last Post: Vig
  coating of Al2O3-TiO2 by HVOF mlavar 7 6,311 02-05-2014, 02:50 AM
Last Post: Stephen Booth
  Surface prep issues before APS coating msiranni 6 5,706 06-21-2011, 12:56 PM
Last Post: Justin
  Porous Machined Surface on Part Lower Inner Diameter on Inco 718 Coating Surface Alexangel1226 4 7,249 03-19-2008, 02:05 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd