Stoichiometric ratio calculation for JP 5000
05-15-2013, 05:32 PM,
#1
Sad  Stoichiometric ratio calculation for JP 5000
Dear Technocrats

I am working on HVOF sprayed coatings, especially using JP-5000 torch. I have read that to decrease the particle temperature at roughly constant velocity, stoichiometry is shifted to higher side. I would like to calculate the stoichiometric ratio for following Fuel and oxygen flow rates :
1) Kerosene - 18 slph , Oxygen 1700 scfh.
2) Kerosene- 20 slph, oxygen 1900 scfh.
3) kerosene- 22 slph, oxygen 2100 scfh

Please anyone help me. I really need to understand this term.Question

regards
Reply
05-15-2013, 08:48 PM,
#2
RE: Stoichiometric ratio calculation for JP 5000
1 SCFH = 0.4381 NLPM.

1700 scfh is 12.41 NLPH
Reply
05-16-2013, 04:59 AM,
#3
RE: Stoichiometric ratio calculation for JP 5000
(05-15-2013, 08:48 PM)derek Wrote: 1 SCFH = 0.4381 NLPM.

1700 scfh is 12.41 NLPH

THANKS FOR REPLY DEREK,

What is the relation between SLPH and NLPH ? I have seen in one thread (by author Metallurgy_eng) of this forum that JP-5000 manufacturer have designated O2= 800 slpm and fuel = 20 lph combination to lambada=1 (o2/fuel).
Please throw some light on this point also.

regards
Reply
06-13-2013, 07:33 PM,
#4
RE: Stoichiometric ratio calculation for JP 5000
TAFA has 275 scfh of O2 to one gallon of kero

or

2056 liters to 1 liter kero

I think most use 2.118 for the nlpm to scfh conversion.

nplm is metric and 0*C at 1 atm
slpm is 21*C at 1 atm - usually... it can be 20*C as well
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Robot speed & RL turn table calculation demionkrishan 9 6,202 05-12-2020, 07:32 PM
Last Post: Lemster68
  Material Required Calculation Help connoramcguigan 3 992 11-21-2018, 09:43 PM
Last Post: sprayloud
  Stoichiometric plzc126330 1 847 09-25-2018, 07:31 AM
Last Post: Vadim Verlotski
  HVOF Undercut Calculation Carguy1968 1 814 07-12-2018, 04:11 PM
Last Post: Lemster68
  Metco Wokajet & Tafa JP 5000 Parts RV_DMG 2 2,831 12-18-2015, 08:19 AM
Last Post: RV_DMG
  JP 5000 Instruction Manual RV_DMG 0 3,386 11-25-2014, 03:45 PM
Last Post: RV_DMG
  Life of JP 5000 Gun Parts? RV_DMG 5 4,990 11-14-2014, 03:33 PM
Last Post: hvofhamid
  JP 5000 Type System Chiller Power Supply Edson 4 4,142 11-13-2014, 07:45 AM
Last Post: Parat Tech
  JP 5000 RV_DMG 3 3,200 10-07-2014, 12:39 PM
Last Post: RV_DMG
  STOICHIOMETRIC DENSITY CALCULATION OF ALLOY DENSITY Vijay Deshpande 1 5,344 06-21-2011, 07:03 PM
Last Post: Gordon
  JP 5000 spray issue mehongbo 1 3,564 02-04-2011, 03:36 PM
Last Post: derek
  Stoichiometric fuel ratio =λ Met.Eng. 1 8,501 01-14-2011, 08:44 PM
Last Post: Gordon
  The ratio of oxygen to fuel of Jet kote III wangqun72 5 7,477 09-02-2010, 06:18 PM
Last Post: wangqun72
  O2/fuel ratio changes Intel55 5 6,171 03-13-2009, 10:11 AM
Last Post: landemarre



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd