Stellite Jet Kote - Green flame?
05-29-2012, 01:25 PM,
#1
Stellite Jet Kote - Green flame?
We run 25 hours with Stellite JK 2 system, Bulk H2 gas, Bulk LOX, Bulk liquid Ar cariier. However we are having a problem lately with a green flame, and bright green flashes. W, co, ni coating, Wondering if anyone can help us identify where this could be coming from. we have performed line pressure drop tests which all passed which tell s me that it may be a fuel gas supplier issue, any help would be appreciated. Thank you
Reply
05-29-2012, 04:01 PM,
#2
RE: parts during life torch
water cooling is not impermeable
when water go into barrel your flame is green
Reply
05-29-2012, 05:27 PM,
#3
RE: parts during life torch
Could there be a possible contamination from the h2 gas, LOX, Ar, which would cause a green flame. example, Nitrogen, if the supplier's trailer wasn't propery filled or rehabbed properly.

We change combustion chamber, combustion head, and nozzle every 25 hours, with new o rings. Hopper rebuild every 50 hours

Thank you fpr any help you can give
Reply
05-29-2012, 06:29 PM,
#4
RE: Stellite Jet Kote - Green flame?
Hi farmcop1

Sign0016 to the Surface Engineering Forum.

Thought your post deserved its own thread.

Green flame may be indication of copper burning in flame. I would suspect your gun hardware. Barrel build-up or as hvofhamid comments. Possibly powder contamination. I would not dismiss a problem with your supplier's trailer set-up though, just sounds unlikely.
Reply
05-29-2012, 07:25 PM,
#5
RE: Stellite Jet Kote - Green flame?
Thanks to all, for the quick responses. When we receive powder lots from Stellite, we compare certs with our strict requirements, they have all been within spec. However i have never looked at it from that prospective. I think just to be safe i am going to bring in Davis Lee from stellite to view our used combustion heads, and used nozzles for his opinion on the used conditions. Also, I would like to have all our bulk gasses tested for impurities as well. I love this website, and love the thermal coating process.

Cheers to everyone,

Farmcop
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Stellite 6 welding rods Desmond 7 13,584 04-18-2016, 07:31 AM
Last Post: sreenuvundela
  Jet kote gun leakage problem Hector Monjardin 0 1,841 11-18-2015, 04:24 PM
Last Post: Hector Monjardin
  Can stellite 6 fuse ??? Met.Eng. 1 3,640 03-12-2014, 06:19 AM
Last Post: sreenuvundela
  Green color with Cr3C2/Ni20Cr sal 1 2,726 04-25-2013, 12:21 PM
Last Post: Gordon
  Stellite Powder test guru2707 1 6,713 02-27-2013, 08:05 AM
Last Post: novakmichal86
  Stellite Hardfacing test guru2707 4 12,137 06-04-2012, 01:03 PM
Last Post: Aseem
  Laser Cladding Stellite#6 Kedarnath 6 16,834 02-04-2011, 01:51 PM
Last Post: Nick4u1
  Jet kote III orthogonal spray parameters query wangqun72 6 7,016 09-05-2010, 05:57 AM
Last Post: k09
  The ratio of oxygen to fuel of Jet kote III wangqun72 5 7,461 09-02-2010, 06:18 PM
Last Post: wangqun72
  stellite coating samsarani 1 9,353 07-29-2010, 09:19 PM
Last Post: djewell
  Jet Kote O2 and H2 supply pressure requirements? Intel55 1 3,686 06-26-2009, 03:32 PM
Last Post: Intel55
  Green Pvd inquiry? bry1975 2 4,072 06-07-2009, 05:17 AM
Last Post: bry1975
  Jet Kote nozzle life plyer 8 10,258 05-15-2009, 02:30 PM
Last Post: plyer
  Jet Kote water inlet temp... Intel55 4 5,788 03-19-2009, 10:53 PM
Last Post: Gordon
  Green Discoloration! steve 5 5,178 11-02-2008, 10:37 PM
Last Post: steve



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd