Stellite Hardfacing test
05-30-2008, 02:11 PM,
#1
Stellite Hardfacing test
Dear all,

we are doing hardfacing in seat area for ic engine valves, please tell me the way out to find blow holes & bonding defects detection by Ndt Method, who is making the equipment.

we are doing this by Pta process, also tell me what could be possible cause for this defect

guru
Reply
05-30-2008, 05:56 PM,
#2
RE: Stellite Hardfacing test
Hi Guru

Sign0016 to the Surface Engineering Forum.

Other than dye penetrant crack testing, which will only show defects that break the surface I think ultra-sonic, thermography, (possible eddycurrent) and radiography type methods will be needed to detect internal defects.

I will leave your other questions to those more experienced with PTA (plasma transfer arc) welding process.
Reply
05-31-2008, 07:05 PM,
#3
RE: Stellite Hardfacing test
Gordon Wrote:Hi Guru

Sign0016 to the Surface Engineering Forum.

Other than dye penetrant crack testing, which will only show defects that break the surface I think ultra-sonic, thermography, (possible eddycurrent) and radiography type methods will be needed to detect internal defects.

I will leave your other questions to those more experienced with PTA (plasma transfer arc) welding process.

hi everybody
stellite on pta can be tested by uv
i welded stellite on seats for oil for long time,pta is very sensible machine,everything can cause problems
only the position of powder feeder can be determinante in quality of welding
pre heat is very important,it depend the size you are welding ,we cant recomand any temperature
gas must be controled :arg,hel
dust extraction mustn t make turbulence otherwise you will have some problems :deposition of burnt particule on welding parts
i hope this can help
Reply
06-01-2008, 11:07 PM,
#4
RE: Stellite Hardfacing test
hvofhamid Wrote:
Gordon Wrote:Hi Guru

Sign0016 to the Surface Engineering Forum.

Other than dye penetrant crack testing, which will only show defects that break the surface I think ultra-sonic, thermography, (possible eddycurrent) and radiography type methods will be needed to detect internal defects.

I will leave your other questions to those more experienced with PTA (plasma transfer arc) welding process.

hi everybody
stellite on pta can be tested by uv
i welded stellite on seats for oil for long time,pta is very sensible machine,everything can cause problems
only the position of powder feeder can be determinante in quality of welding
pre heat is very important,it depend the size you are welding ,we cant recomand any temperature
gas must be controled :arg,hel
dust extraction mustn t make turbulence otherwise you will have some problems :deposition of burnt particule on welding parts
i hope this can help
hi man
seats I presum you weld 2" 3" 4" 5" 6" and 9"
2" preheat 110� 22 V first pass 150 A 2nd 145A
3" preheat 120-140� first pass 165A 2ND 150 A
4" 140-160� 165 2ND 155A
5" 180-200� 175 2ND 160
6" normal same temperature than 5"
large piste 200-220� 175A 2ND 160A
Reply
06-04-2012, 01:03 PM, (This post was last modified: 06-04-2012, 01:04 PM by Aseem.)
#5
Star  RE: Stellite Hardfacing test
hey friends ,
I had a problem in my company , where i just joined for training , there are some components clad with PTA process , but NDT showed that there are cracks and some defects in the components , PLease if anyone can suggest a solution or just guide me to a link whre i can get one ..!! thanks ..!!
(06-04-2012, 01:03 PM)Aseem Wrote: hey friends ,
I had a problem in my company , where i just joined for training , there are some components clad with PTA process , but NDT showed that there are cracks and some defects in the components , PLease if anyone can suggest a solution or just guide me to a link whre i can get one ..!! thanks ..!!

and yes it a stellite cladding
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Stellite 31 Daneizer 0 1,599 02-05-2021, 04:15 PM
Last Post: Daneizer
  Hardfacing shredder blades ?? RD.welding 1 3,024 06-26-2018, 08:07 AM
Last Post: velocity
  Stellite 6 welding rods Desmond 7 17,000 04-18-2016, 07:31 AM
Last Post: sreenuvundela
  Can stellite 6 fuse ??? Met.Eng. 1 5,246 03-12-2014, 06:19 AM
Last Post: sreenuvundela
  Stellite Powder test guru2707 1 7,901 02-27-2013, 08:05 AM
Last Post: novakmichal86
  Laser Cladding Stellite#6 Kedarnath 6 19,636 02-04-2011, 01:51 PM
Last Post: Nick4u1
  Hardfacing Powder making bubbles in the cord attin 5 6,210 09-07-2010, 12:57 AM
Last Post: Simon Kim
  stellite coating samsarani 1 11,265 07-29-2010, 09:19 PM
Last Post: djewell
  Hardfacing nickel based powders to AISI 431 Stainless Steel attin 10 15,336 04-28-2009, 02:26 PM
Last Post: djewell



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd