Spraying Pure Aluminium
08-04-2008, 09:17 AM,
#1
Spraying Pure Aluminium
Hey guy's

Any ideas on this one?

Trying to spray pure aluminium using SG100 (std hardware) and internal injection, Im getting some great looking results but am struggling to meet customer spec with regards to hardness (20-40HV .1) Im getting around 45HV. I was running higher voltage and current (400A 50V) but reduced this to try and reduce hardness but with little sucess.

Parameters run currently are

Ar 30SLM
H2 2-4 l to achieve voltage
6SLM Ar carrier
Volts 45 (at torch)
Current 350
Feedrate 18g/min

Scan Settings
Traverse 250mm/s
Advance 5mm Per pass
S/off 4"


Any ideas would be appreciated.


J_rock
Reply
08-05-2008, 02:51 PM,
#2
RE: Spraying Pure Aluminium
Hi J_rock

First I must say that I have not had the opportunity to play around with the SG100, so bear that in mind Happy0193

Your approach of reducing heat input, lowering oxidation seems like the right direction to me. I would continue in this direction, but may be by increasing the primary argon plasma gas flow as well (dependent on whether your nozzle is comfortable with higher argon flow?). Hopefully, this will increase velocity, reducing particle dwell time while maintaining good coating density. A higher powder feed rate may also help.

Let us know how you get on and good luck Big Grin
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Surface Preparation of Aluminium acidic 2 3,299 05-09-2015, 01:59 PM
Last Post: CHI3
  Pure Aluminum on GFRP Composite Substrate ahmadsahid 4 3,968 05-01-2014, 01:34 PM
Last Post: Gordon
  Bonding for Wire Flame Spray using Aluminum pure wire iwan-sedaryawan 3 4,448 12-14-2012, 08:00 PM
Last Post: MichiganMan
  Cr3C2 Ni-Cr coating on Aluminium ehsan 4 5,188 10-19-2011, 12:50 PM
Last Post: ehsan
  Coating freak Off From Aluminium Eagleman 5 5,000 04-25-2010, 02:29 PM
Last Post: Gordon
  Aluminium properties Yukawa 4 9,411 11-10-2009, 12:19 PM
Last Post: Yukawa
  Aluminium coating exnnerspray 5 12,836 05-06-2009, 04:42 PM
Last Post: Gordon
  aluminium coating 123raoel 3 4,817 04-21-2009, 12:47 PM
Last Post: Gordon
  Coatings for aluminium bshah 4 6,241 11-17-2008, 07:06 PM
Last Post: Gordon
  Alternative material for pure aluminum powder Madila Awalini 1 5,089 03-25-2008, 03:08 PM
Last Post: Intel55



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd